跳转到主内容

HTC One Max Fingerprint Sensor Replacement

你所需要的

  1. HTC One Max Fingerprint Sensor Replacement, Back Case: 步骤 1 中的图像 1,1
    • Lift back cover while pressing highlighted release switch towards the center of the phone.

  2. HTC One Max Fingerprint Sensor Replacement: 步骤 2 中的图像 1,2 HTC One Max Fingerprint Sensor Replacement: 步骤 2 中的图像 2,2
    • Remove the four white stickers in each corner that cover the Tri-Wing screws.

    • Remove the white sticker near the buttons that control the volume.

    • Remove the white sticker near the SIM card.

    • Remove the big white sticker with the bar-code in the center of the phone.

  3. HTC One Max Fingerprint Sensor Replacement: 步骤 3 中的图像 1,1
    • Remove the thirteen Tri-Wing Y00 screws (Upper & Lower screws are 5 mm length, middle screws are 3.8 mm length) from the back case.

    • Disconnect the cable near the volume buttons.

  4. HTC One Max Fingerprint Sensor Replacement: 步骤 4 中的图像 1,2 HTC One Max Fingerprint Sensor Replacement: 步骤 4 中的图像 2,2
    • Use the small plastic opening tool to pry between the screen and the rear case.

  5. HTC One Max Fingerprint Sensor Replacement, Fingerprint Sensor: 步骤 5 中的图像 1,2 HTC One Max Fingerprint Sensor Replacement, Fingerprint Sensor: 步骤 5 中的图像 2,2
    在这个步骤中使用的工具:
    Tweezers
    $4.99
    购买
    • Use Tweezers to disconnect the ribbon cable connecting the fingerprint sensor to the motherboard.

    • When replacing the fingerprint sensor, make sure the ribbon cable snaps into the port on the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Andrey Sklyar

于09/23/14注册

452 声望

创作了2篇指南

团队

USF Tampa, Team 11-3, Blackwell Fall 2014 USF Tampa, Team 11-3, Blackwell Fall 2014 的会员

USFT-BLACKWELL-F14S11G3

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 7

总计 1,279