简介

This guide will teach you how to replace the external speaker on your phone. The external speaker is the speaker that is used for louder noises produced from your phone such as music. This is different from the ear speaker that you hear during phone calls.

  1. First remove the back cover of your phone to expose the battery.
    • First remove the back cover of your phone to expose the battery.

  2. Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.
    • Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.

    • Take the battery out

    • When reassembling, make sure that the battery contacts match up.

    • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone

    • Remove the two 4.3mm #00 Phillips screws that secure the back panel to the rest of the phone

    • Use the plastic opening tool to pry the clips off

    • Insert the plastic opening tool along the seams at different points to it pry up

    • This may require a bit of force. The USB port cover may fall off in this step.

    • Using the plastic opening tool, pry the external speaker out of the back panel.

结论

To reassemble your device, follow these instructions in reverse order.

Alyssa Thompson

于2011年10月04日注册

11 信誉积分

创作了2篇指南

团队

Cal Poly, Team 20-29, Maness Fall 2011 Cal Poly, Team 20-29, Maness Fall 2011 的会员

CPSU-MANESS-F11S20G29

4 名成员

创作了9篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 781