修复你的物品 社区 商店

HTC Hero Trackball Replacement

你所需要的

  1. HTC Hero Trackball Replacement, Back Case: 步骤 1 中的图像 1，1

    • Remove the back of the phone by pushing firmly with your thumbs up towards the camera.

    • Remove both the battery and the SD card (Press SD card in to release)

    • Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

    编辑

  2. HTC Hero Trackball Replacement: 步骤 2 中的图像 1，1

    • Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.

    • Insert the flat end between the back and front enclosure, working your way around the rim.

    编辑

  3. HTC Hero Trackball Replacement: 步骤 3 中的图像 1，1

    • Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.

    • It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

    编辑

  5. HTC Hero Trackball Replacement: 步骤 4 中的图像 1，2 HTC Hero Trackball Replacement: 步骤 4 中的图像 2，2

    • Carefully separate the front and back enclosures once all of the clips have been disengaged.

    • Be sure to not separate too quickly or you risk breaking an attached tab.

    编辑

  6. HTC Hero Trackball Replacement, Trackball: 步骤 5 中的图像 1，2 HTC Hero Trackball Replacement, Trackball: 步骤 5 中的图像 2，2

    • Remove the two screws near the bottom of the motherboard with a Phillips head screwdriver.

    编辑

  7. HTC Hero Trackball Replacement: 步骤 6 中的图像 1，2 HTC Hero Trackball Replacement: 步骤 6 中的图像 2，2

    • Gently pull off the ribbons holding the sides of the motherboard to the front enclosure.

    编辑

  8. HTC Hero Trackball Replacement: 步骤 7 中的图像 1，2 HTC Hero Trackball Replacement: 步骤 7 中的图像 2，2

    • Remove the motherboard from within the front enclosure.

    • Be careful when pulling the ribbons off the motherboard as they may rip or break.

    编辑

  9. HTC Hero Trackball Replacement: 步骤 8 中的图像 1，2 HTC Hero Trackball Replacement: 步骤 8 中的图像 2，2

    • Tilt the inside of the front enclosure towards your cupped palm to remove the trackball and it's enclosure will fall out.

    编辑

  10. HTC Hero Trackball Replacement: 步骤 9 中的图像 1，3 HTC Hero Trackball Replacement: 步骤 9 中的图像 2，3 HTC Hero Trackball Replacement: 步骤 9 中的图像 3，3

    • Position the phone off of the edge of the table and insert the replacement part by inserting the bevel then the trackball into the hole.

    • Make sure the two plastic pins on the trackball bevel are oriented horizontally.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与4其他贡献者

Max Brown

于01/23/12注册

139 声望

创作了4篇指南

徽章: 7

+ 4更多徽章

团队

Cal Poly, Team 3-26, Amido Winter 2012 Cal Poly, Team 3-26, Amido Winter 2012 的会员

CPSU-AMIDO-W12S3G26

5 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 1,510