Skip to main content
  1. Remove the back of the phone by pushing firmly with your thumbs up towards the camera.
    • Remove the back of the phone by pushing firmly with your thumbs up towards the camera.

    • Remove both the battery and the SD card (Press SD card in to release)

    • Locate and remove the four Torx screws highlighted in the photo, with the phone laying face down on your work space.

  2. Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.
    • Carefully pry the inside back cover from the device using an appropriate size plastic opening tool or small flathead screwdriver.

    • Insert the flat end between the back and front enclosure, working your way around the rim.

  3. Gently  depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.
    • Gently depress and release the small plastic tabs around the rim in the front enclosure, highlighted here.

    • It is best to start with the tab found on the top center of the phone, as it is easiest to locate.

  4. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  5. Carefully separate the front and back enclosures once all of the clips have been disengaged. Be sure to not separate too quickly or you risk breaking an attached tab.
    • Carefully separate the front and back enclosures once all of the clips have been disengaged.

    • Be sure to not separate too quickly or you risk breaking an attached tab.

  6. Locate the four metal tabs on the top and bottom of the camera holding the camera enclosure to the motherboard. Locate the four metal tabs on the top and bottom of the camera holding the camera enclosure to the motherboard. Locate the four metal tabs on the top and bottom of the camera holding the camera enclosure to the motherboard.
    • Locate the four metal tabs on the top and bottom of the camera holding the camera enclosure to the motherboard.

  7. Using a pair of metal tweezers, simultaneously depress both tabs on one side of the camera enclosure and gently pull up until tabs come free.  Repeat for the opposite side. Using a pair of metal tweezers, simultaneously depress both tabs on one side of the camera enclosure and gently pull up until tabs come free.  Repeat for the opposite side.
    • Using a pair of metal tweezers, simultaneously depress both tabs on one side of the camera enclosure and gently pull up until tabs come free. Repeat for the opposite side.

  8. Pull the released camera enclosure away from the motherboard until it is completely free. Pull the released camera enclosure away from the motherboard until it is completely free.
    • Pull the released camera enclosure away from the motherboard until it is completely free.

  9. Now with camera unit exposed, gently wiggle the camera as you pull away from the phone to remove it. Now with camera unit exposed, gently wiggle the camera as you pull away from the phone to remove it.
    • Now with camera unit exposed, gently wiggle the camera as you pull away from the phone to remove it.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Max Brown

于2012年01月23日注册

139 Reputation

创作了4篇指南

Team

Cal Poly, Team 3-26, Amido Winter 2012 Cal Poly, Team 3-26, Amido Winter 2012 的会员

CPSU-AMIDO-W12S3G26

5 名成员

创作了6篇指南

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 1,256