简介

This guide will help you get to the speaker, in case it needs to be replaced

  1. Carefully pull the rear cover from the back of the phone.
    • Carefully pull the rear cover from the back of the phone.

    • Place a finger beneath the small lip on the left side of the battery.

    添加评论

  2. Lay the phone down on it's screen.
    • Lay the phone down on it's screen.

    • Lift up on the lip and pull the battery from the phone.

    添加评论

    • Remove the four black 3.5mm T5 screws from the back of the phone.

    添加评论

    • Insert the flat end of a spudger between the midframe and the display.

    • Slide the spudger along the seam between the frame and the display.

    • Using the spudger for leverage, carefully pry the midframe away from the display assembly.

      • This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.

    • As it releases, pull the midframe away from the phone.

    • The volume control tab may fall off during removal. It can be easily reattached.

    添加评论

    • With the chassis removed, set down the phone and locate the speaker on the inside of the housing.

    • The speaker should be easily popped out of place with a small amount of force

    添加评论

    • Congratulations! The speaker is now removed and can be replaced or repaired.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Nathan Puchalski

于2011年04月26日注册

813 信誉积分

创作了5篇指南

团队

Cal Poly, Team 24-55, Amido Spring 2011 Cal Poly, Team 24-55, Amido Spring 2011 的会员

CPSU-AMIDO-S11S24G55

5 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 6,730