修复你的物品 社区 商店

HTC Evo 3D Vibrate Mechanism Replacement

简介

This guide will show how one can disassemble and replace the vibrating mechanism of the HTC Evo 3D. Replacing this mechanism will help to restore the vibration feature to your phone.

你所需要的

  1. HTC Evo 3D Vibrate Mechanism Replacement, Vibrate Mechanism: 步骤 1 中的图像 1，3 HTC Evo 3D Vibrate Mechanism Replacement, Vibrate Mechanism: 步骤 1 中的图像 2，3 HTC Evo 3D Vibrate Mechanism Replacement, Vibrate Mechanism: 步骤 1 中的图像 3，3

    • Remove the outer casing of the phone with your hands by prying and lifting at the latch.

    编辑

  2. HTC Evo 3D Vibrate Mechanism Replacement: 步骤 2 中的图像 1，2 HTC Evo 3D Vibrate Mechanism Replacement: 步骤 2 中的图像 2，2

    • Remove the battery with your hands, lifting at the marked area.

    编辑

  4. HTC Evo 3D Vibrate Mechanism Replacement: 步骤 3 中的图像 1，1

    • Remove the SD card

    • Remove the four T5 screws using the corresponding screwdriver.

    • Remove the two J000 screws using the corresponding screwdriver.

    编辑

  5. HTC Evo 3D Vibrate Mechanism Replacement: 步骤 4 中的图像 1，2 HTC Evo 3D Vibrate Mechanism Replacement: 步骤 4 中的图像 2，2

    • With the battery removed, the inner case of the phone can now be removed.

    • Using the plastic opening tool, pry the inner case off at the marked area. Continue prying around the entire perimeter of the phone.

    • This will remove the inner case, and allow access into the inner portion of the phone.

    • Be careful not rip or damage the ribbons inside this shell.

    编辑

  6. HTC Evo 3D Vibrate Mechanism Replacement: 步骤 5 中的图像 1，3 HTC Evo 3D Vibrate Mechanism Replacement: 步骤 5 中的图像 2，3 HTC Evo 3D Vibrate Mechanism Replacement: 步骤 5 中的图像 3，3

    • The vibrating mechanism is located on the motherboard, on the right.

    • The marked part is the vibrating mechanism.

    • To remove the vibrating mechanism, use the tweezers to securely hold the wire and tug on it.

    • The vibrating unit can then be disconnected from the motherboard using the tweezers, grasping the white part.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

James Burke

于08/26/15注册

245 声望

创作了2篇指南

徽章: 6

+ 3更多徽章

团队

USF Tampa, Team 14-20, Meier Fall 2015 USF Tampa, Team 14-20, Meier Fall 2015 的会员

USFT-MEIER-F15S14G20

5 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 237