HP x2 10-p010wm Screen Replacement

简介

Model Number : HP x2 10-p010wm

If your device’s screen is unresponsive or it does not turn on, it is most likely that you need to replace your screen.

This guide will show you how to take apart the screen in order to remove it from its plastic frame to replace it. But we recommend you to check our troubleshooting page first.

你所需要的

步骤 1 Screen

HP x2 10-p010wm Screen Replacement, Screen: 步骤 1 中的图像 1，2

HP x2 10-p010wm Screen Replacement, Screen: 步骤 1 中的图像 2，2

Pull the screen away from the keyboard.

编辑

步骤 2

Insert a spudger into the space between the screen and computer and gently pry the two pieces apart. Continue this around the whole screen.

编辑

步骤 3

Slowly disconnect the thin wire attaching the screen to the rest of the computer by holding one end and sliding it down.
Do not pull up too hard; slowly slide it towards the screen.

编辑