跳转到主内容

HP w2216h Speaker Replacement

你所需要的

  1. HP w2216h Speaker Replacement, Screen: 步骤 1 中的图像 1,1
    • 'Make sure you are grounded, the power supply is not connected and you are wearing safety goggles.

    • Use the Philips #000 screwdriver to remove the 4 round12mm screws on the back panel.

  2. HP w2216h Speaker Replacement: 步骤 2 中的图像 1,2 HP w2216h Speaker Replacement: 步骤 2 中的图像 2,2
    • Using a Philips #000 head remove 2 flat 12 mm screws above stand mounting bracket.

    • Using a PH1 Philips head with the 150 mm flexible extension remove 1 Philips head screw under the stand mounting bracket.

    • Stand will easily pull off.

  3. HP w2216h Speaker Replacement: 步骤 3 中的图像 1,3 HP w2216h Speaker Replacement: 步骤 3 中的图像 2,3 HP w2216h Speaker Replacement: 步骤 3 中的图像 3,3
    • Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.

    • Turn monitor so that the screen is facing you.

    • Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.

    • The best places to pry are in the lower left and lower right corners of the black bezel.

  4. HP w2216h Speaker Replacement: 步骤 4 中的图像 1,3 HP w2216h Speaker Replacement: 步骤 4 中的图像 2,3 HP w2216h Speaker Replacement: 步骤 4 中的图像 3,3
    • Be careful of the wires attaching the power button and the control buttons. Show extreme caution to ensure the button is not damaged.

    • Lift the screen assembly from the plastic housing from the corners.

  5. HP w2216h Speaker Replacement: 步骤 5 中的图像 1,2 HP w2216h Speaker Replacement: 步骤 5 中的图像 2,2
    • Remove the 4 connectors from the left side of the monitor on the back.

  6. HP w2216h Speaker Replacement: 步骤 6 中的图像 1,3 HP w2216h Speaker Replacement: 步骤 6 中的图像 2,3 HP w2216h Speaker Replacement: 步骤 6 中的图像 3,3
    • Lift the gray tape of the top of the monitor to expose the ribbon cable.

    • Remove the ribbon cable by sliding the connector towards the center of the screen assembly.

    • Lift the reflective tape next to the gray tape.

  7. HP w2216h Speaker Replacement: 步骤 7 中的图像 1,3 HP w2216h Speaker Replacement: 步骤 7 中的图像 2,3 HP w2216h Speaker Replacement: 步骤 7 中的图像 3,3
    • Remove the 4 PH1 8mm Philips round screws on the outer edge of the screen's assembly.

    • Lift the screen from the screen assembly.

  8. HP w2216h Speaker Replacement, Speakers: 步骤 8 中的图像 1,1
    • Remove the tape holding each speakers wire to the screen assembly.

  9. HP w2216h Speaker Replacement: 步骤 9 中的图像 1,2 HP w2216h Speaker Replacement: 步骤 9 中的图像 2,2
    • Remove the two 8mm Philips #000 head screws on each speaker.

  10. HP w2216h Speaker Replacement: 步骤 10 中的图像 1,2 HP w2216h Speaker Replacement: 步骤 10 中的图像 2,2
    • Remove the speakers by lifting them vertically from the screen assembly.

  11. HP w2216h Speaker Replacement: 步骤 11 中的图像 1,1
    • Remove the cables that connects the speakers to the signal output board.

结论

To reassemble your device, follow these instructions in reverse order.

Patrick Aucoin

于03/25/16注册

221 声望

创作了2篇指南

团队

UMass Dartmouth, Team 1-1, Miles Spring 2016 UMass Dartmouth, Team 1-1, Miles Spring 2016 的会员

UMASSD-MILES-S16S1G1

4 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 6

过去 30 天: 8

总计 304