修复你的物品 社区 商店

HP Z2 Mini G3 Access Panel Replacement

简介

This is the top cover to access the interior components of the HP Z2 Mini G3 (Product No. 1LE81UP#ABA). This guide can direct you to remove the panel.

Be sure to turn off the device and disconnect the A/C power cord before removing the panel.

Components inside the device are also subject to static damage, so try and work on a hard surface to reduce this risk.

  1. HP Z2 Mini G3 Access Panel Replacement, Access Panel: 步骤 1 中的图像 1，1

    • Turn the device so the back-side of the device is facing you.

    • Be sure that the power is off and the A/C power cord has been disconnected before starting. Removing hardware while the power is on could damage the device or harm yourself.

    • Components of the device are subject to static damage. Work on a hard, grounded surface to prevent damage to the workstation.

    翻译

  3. HP Z2 Mini G3 Access Panel Replacement: 步骤 2 中的图像 1，2 HP Z2 Mini G3 Access Panel Replacement: 步骤 2 中的图像 2，2

    • Slide and hold the latch in the direction of the engraved arrow (to the right).

    翻译

  4. HP Z2 Mini G3 Access Panel Replacement: 步骤 3 中的图像 1，2 HP Z2 Mini G3 Access Panel Replacement: 步骤 3 中的图像 2，2

    • While holding the latch, lift the access panel upwards and towards yourself and set it aside upside-down.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 31

总计 1,055