HP Stream 13-c110nr Keyboard Assembly Replacement

Stacey Deel 和 8 其他贡献者

最后更新于 January 10, 2025

10 - 20 分钟

中等

更好的介绍

简介

转到步骤 1

This guide is designed to walk you through a step-by-step process of replacing the keyboard assembly on your device. The Keyboard Assembly guide will assist the user in opening the HP Stream 13-c110nr for further repairs. The guide is the initial guide for all repair activity.

你所需要的

工具

当你通过这些链接购买商品时，iFixit 会赚取佣金。

步骤 1 Keyboard Assembly

HP Stream 13-c110nr Keyboard Assembly Replacement, Keyboard Assembly: 步骤 1 中的图像 1，1

Close the device.
Remove AC adapter plug from electrical outlet.
Remove AC adapter from device.
Turn the device off.
Unplug all external devices from device.
If you are unsure whether the computer is off or in hibernation mode, start the computer and then shutdown the operating system.

翻译

步骤 2

Turn the device upside down with the back facing towards you.

翻译

步骤 3

HP Stream 13-c110nr Keyboard Assembly Replacement: 步骤 3 中的图像 3，3

Use a pick to remove the two (2) large computer feet along the back edge of the device.
Use a pick to remove the two (2) small computer feet.
Use a pick to remove the one (1) screw cover.
Place rubber computer feet in safe place for reassembly.

翻译

步骤 4

HP Stream 13-c110nr Keyboard Assembly Replacement: 步骤 4 中的图像 3，3

在这个步骤中使用的工具：

Magnetic Project Mat

$19.95

添加到购物车

Remove the thirteen (13) Phillips P0 PM2.5x6.0 mm screws.
Place the thirteen (13) screws on magnetic mat for reassembly.

翻译

步骤 5

Turn the device over with the front facing towards you.
Open the device as shown.

翻译

步骤 6

HP Stream 13-c110nr Keyboard Assembly Replacement: 步骤 6 中的图像 3，3

Insert the Spudger between the Top Cover and Bottom Cover to lift the front edge until it separates from the Bottom Cover.
Do not completely remove the Keyboard/Top cover from the Bottom cover yet.

翻译