跳转到主内容

简介

This guide will show you how to pry open the screen and replace the Rear Facing Camera.

  1. Secure the suction cup to the center of the screen. Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.
    • Secure the suction cup to the center of the screen.

    • Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.

  2. Use the Spudger to disconnect the ribbon cable to the rear facing camera.
    • Use the Spudger to disconnect the ribbon cable to the rear facing camera.

  3. Use the tweezers to pry the camera assembly away from the motherboard.
    • Use the tweezers to pry the camera assembly away from the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Andrew Hall

于2016年05月23日注册

322 信誉积分

创作了3篇指南

团队

IUPUI, Team 1-4, Renguette SU 2016 IUPUI, Team 1-4, Renguette SU 2016 的会员

IUPUI-RENGUETTE-SU16S1G4

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 143