跳转到主内容

简介

This guide will show you how to pry open the screen and replace the front-facing camera.

  1. Secure the suction cup to the center of the screen. Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.
    • Secure the suction cup to the center of the screen.

    • Using a plastic opening tool, pry along the edges of the display while pulling upwards with the suction cup.

  2. Use the Spudger  to disconnect the ribbon cable to the upper camera by prying the connector away from the board.
    • Use the Spudger to disconnect the ribbon cable to the upper camera by prying the connector away from the board.

  3. Use ESD safe tweezers to pry the camera away from the motherboard starting at the side opposite the ribbon cable.
    • Use ESD safe tweezers to pry the camera away from the motherboard starting at the side opposite the ribbon cable.

结论

To reassemble your device, follow these instructions in reverse order.

Andrew Hall

于2016年05月23日注册

322 信誉积分

创作了3篇指南

团队

IUPUI, Team 1-4, Renguette SU 2016 IUPUI, Team 1-4, Renguette SU 2016 的会员

IUPUI-RENGUETTE-SU16S1G4

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 173