修复你的物品 社区 商店

HP ProBook 4320t Touchpad Replacement Guide

简介

If the touch pad becomes damaged it will need to be replaced in order for it to properly work. There are a good amount of steps in this process but, it is not too difficult.

你所需要的

  1. HP ProBook 4320t Touchpad Replacement Guide, Battery Removal: 步骤 1 中的图像 1，2 HP ProBook 4320t Touchpad Replacement Guide, Battery Removal: 步骤 1 中的图像 2，2

    • Flip the laptop upside down and remove battery by pressing inward on the two latches holding the battery in.

    编辑

  2. HP ProBook 4320t Touchpad Replacement Guide, Screws: 步骤 2 中的图像 1，2 HP ProBook 4320t Touchpad Replacement Guide, Screws: 步骤 2 中的图像 2，2

    • Unscrew the four (2.5 mm Phillips) screws (Use Phillips #0 Screwdriver).

    编辑

  3. HP ProBook 4320t Touchpad Replacement Guide, Flip: 步骤 3 中的图像 1，1

    • Flip laptop over and open it.

    编辑

  4. HP ProBook 4320t Touchpad Replacement Guide, Push N Lift: 步骤 4 中的图像 1，1

    • Slightly push up while lifting up on the power button panel to release the panel.

    编辑

  5. HP ProBook 4320t Touchpad Replacement Guide, Unscrewing: 步骤 5 中的图像 1，1

    • Unscrew the four (2.5 mm Phillips) screws holding the keyboard in (Use Phillips #0 Screwdriver).

    编辑

  7. HP ProBook 4320t Touchpad Replacement Guide, Careful Now: 步骤 6 中的图像 1，2 HP ProBook 4320t Touchpad Replacement Guide, Careful Now: 步骤 6 中的图像 2，2

    • Carefully (holding both sides of the keyboard), push up and lift slightly.

    • Keyboard is still connected via a ribbon cable.

    • Move the keyboard slightly to the left to have access to the keyboard ribbon cable.

    编辑

  8. HP ProBook 4320t Touchpad Replacement Guide, Disconnect Wire: 步骤 7 中的图像 1，1

    • Use the black spudger to lift the black latch holding the keyboard ribbon cable.

    编辑

  9. HP ProBook 4320t Touchpad Replacement Guide, Unscrew: 步骤 8 中的图像 1，1

    • Unscrew the three (2.5 mm Phillips) screws holding the bottom touchpad panel.

    编辑

  10. HP ProBook 4320t Touchpad Replacement Guide, Slide the Panel Off: 步骤 9 中的图像 1，1

    • Carefully slide the bottom panel to the right.

    • Keyboard is connected via a wire to the back of the panel.

    编辑

  11. HP ProBook 4320t Touchpad Replacement Guide, Lift up Carefully: 步骤 10 中的图像 1，1

    • Flip the bottom touchpad panel directly towards the screen, being sure to not lift it too high.

    • Keep an eye on the ZIF connector underneath, make sure it is not pulled accidentally.

    编辑

  12. HP ProBook 4320t Touchpad Replacement Guide, Disconnect Wire: 步骤 11 中的图像 1，1

    • Using the black spudger, slightly pry up on the ZIF connector and lift out the wire carefully.

    编辑

  13. HP ProBook 4320t Touchpad Replacement Guide, Unscrewing: 步骤 12 中的图像 1，1

    • Unscrew the two (2.5 mm Phillips) screws on the touch pad retention panel (Use Phillips #0 screw driver).

    编辑

  14. HP ProBook 4320t Touchpad Replacement Guide, Remove Retention Panel: 步骤 13 中的图像 1，1

    • Slightly push the touch pad retention panel forward to remove from clasp and lift up.

    编辑

  15. HP ProBook 4320t Touchpad Replacement Guide, Touch Pad Screws: 步骤 14 中的图像 1，1

    • Unscrew the following two (2.0 mm Phillips) screws attached to the touchpad (Use Phillips #0 screw driver).

    编辑

  16. HP ProBook 4320t Touchpad Replacement Guide, Remove Touchpad: 步骤 15 中的图像 1，1

    • Slightly lift up the bottom of the touchpad and pull towards you to free the touchpad from the casing

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与5其他贡献者

Joshua

于09/23/14注册

134 声望

创作了6篇指南

徽章: 11

+ 8更多徽章

团队

USF Tampa, Team 9-5, Blackwell Fall 2014 USF Tampa, Team 9-5, Blackwell Fall 2014 的会员

USFT-BLACKWELL-F14S9G5

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 9

总计 1,335