跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

简介

By opening up the printer by unscrewing a few screws.This will allow you to take the wireless card out of it's socket and replace it.

配件

没有特定配件。

  1. Open the top of the printer as shown.
    • Open the top of the printer as shown.

    • The wireless card is located on the left side of the printer if you are viewing it from the front.

  2. Using the T9 Torx Security screwdriver bit, unscrew the 12 mm screw on the far left side on the top of the printer.
    • Using the T9 Torx Security screwdriver bit, unscrew the 12 mm screw on the far left side on the top of the printer.

  3. After unscrewing the screw, the left side will slide down revealing the wireless card.
    • After unscrewing the screw, the left side will slide down revealing the wireless card.

  4. Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard. Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard. Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard.
    • Unscrew one 12mm screw and gently disconnect the wireless card from the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Charles

于2014年10月23日注册

272 信誉积分

创作了2篇指南

团队

Michigan Tech, Team 1-2, Lauer Fall 2014 Michigan Tech, Team 1-2, Lauer Fall 2014 的会员

MTU-LAUER-F14S1G2

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 17

总计 1,031