修复你的物品 社区 商店

HP Photosmart Premium C309g Scanner Glass Replacement

简介

If the scanner glass cracks or breaks, it will need to be replaced in it's entirety. The glass is visible when you open the top of the printer so you will be able to tell if it needs replacement without taking the printer apart.

你所需要的

  1. HP Photosmart Premium C309g Scanner Glass Replacement, Scanner Glass: 步骤 1 中的图像 1，1

    • Open the top of the printer. The printer should appear as shown.

    翻译

  2. HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 2 中的图像 1，2 HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 2 中的图像 2，2

    • Use the blue plastic opening tool to pry the trim pieces all the way around the printer.

    • Loosen the pieces around the edges before pulling to remove from the printer.

    • Pull the (4) trim pieces off and set them aside.

    翻译

  3. HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 3 中的图像 1，2 HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 3 中的图像 2，2

    • Using the blue plastic opening tool, pull from the middle and then slide back to remove the side panels.

    • The side trim pieces need to be removed before the front trim pieces.

    翻译

  5. HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 4 中的图像 1，1

    • Using the T9 Torx Security screwdriver bit, unscrew the five 12mm screws shown.

    翻译

  6. HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 5 中的图像 1，1

    • The scanner flap is attached by a clip that can be dislodged by pulling it gently away from the printer.

    • Keeping the scanner flap upright, slide it toward the unattached clip in order to dislodge the second clip.

    • Both clips will come unattached and you can set the scanner flap aside.

    翻译

  7. HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 6 中的图像 1，1

    • Lift the scanner glass piece from the printer.

    翻译

  8. HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 7 中的图像 1，2 HP Photosmart Premium C309g Scanner Glass Replacement: 步骤 7 中的图像 2，2

    • The scanner glass is attached to the plastic piece with adhesive tape.

    • Pull off the glass and re-set new piece of glass.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与3其他贡献者

Laura

于10/23/14注册

694 声望

创作了3篇指南

徽章: 12

+ 9更多徽章

团队

Michigan Tech, Team 1-2, Lauer Fall 2014 Michigan Tech, Team 1-2, Lauer Fall 2014 的会员

MTU-LAUER-F14S1G2

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 755