跳转到主内容
  1. Before beginning, make sure the computer is turned off and the charger is disconnected.
    • Before beginning, make sure the computer is turned off and the charger is disconnected.

    • Flip the computer over, so that the bottom is facing up.

  2. To remove the battery, slide the battery switch to the left.
    • To remove the battery, slide the battery switch to the left.

  3. Using a PH Screwdriver, remove the three 7.25mm screws located on the bottom panel. After removing all screws, remove the panel by sliding down.
    • Using a PH Screwdriver, remove the three 7.25mm screws located on the bottom panel.

    • After removing all screws, remove the panel by sliding down.

  4. Using a PH screwdriver, remove the screw adjacent to the white labels.
    • Using a PH screwdriver, remove the screw adjacent to the white labels.

    • There is a keyboard icon next to the screw

  5. Flip the laptop over, and open it.
    • Flip the laptop over, and open it.

  6. Using a plastic spudger, pry beneath the keyboard near the "delete" key, and pop the keyboard up from the laptop.
    • Using a plastic spudger, pry beneath the keyboard near the "delete" key, and pop the keyboard up from the laptop.

    • From the open gap, continue to pry around the perimeter of the keyboard, separating it from the laptop.

  7. Using both hands, carefully lift the keyboard off of the laptop. There may be a ribbon attached. If so, gently pull the ribbon cable up and away from the connector.
    • Using both hands, carefully lift the keyboard off of the laptop.

    • There may be a ribbon attached. If so, gently pull the ribbon cable up and away from the connector.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Bre'Anna Sanders

于2016年10月11日注册

53 信誉积分

创作了2篇指南

团队

USF Tampa, Team 1-7, Leahy Fall 2016 USF Tampa, Team 1-7, Leahy Fall 2016 的会员

USFT-LEAHY-F16S1G7

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 10

过去的30天: 34

总计 813