简介

This guide will explain how to replace the keyboard of the device. The process should be rather simplistic but proceed with caution since some parts of the device are fragile.

配件

无需配件。

  1. Remove the two  5mm Phillips #0 screws from the hinges Remove the two  5mm Phillips #0 screws from the hinges Remove the two  5mm Phillips #0 screws from the hinges
    • Remove the two 5mm Phillips #0 screws from the hinges

  2. Open the device as if you were going to use the device. Using Tweezers, pry the hinges from underneath the screen Not much force is needed to pull the hinges off once the tweezers are properly positioned
    • Open the device as if you were going to use the device. Using Tweezers, pry the hinges from underneath the screen

    • Not much force is needed to pull the hinges off once the tweezers are properly positioned

  3. 所有超过US$100或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Remove the wire connection by gently pulling  on the fuse and connection itself. Do not pull on the wires, as this can remove the wires from the connection, destroying the fuse.
    • Remove the wire connection by gently pulling on the fuse and connection itself.

    • Do not pull on the wires, as this can remove the wires from the connection, destroying the fuse.

  5. Remove the four 4.0 mm Phillips #0 connecting the keyboard to the frame Remove the four 4.0 mm Phillips #0 connecting the keyboard to the frame Remove the four 4.0 mm Phillips #0 connecting the keyboard to the frame
    • Remove the four 4.0 mm Phillips #0 connecting the keyboard to the frame

  6. Gently lift the keyboard up from the frame so that you can see the  ribbon  still connected. Gently lift the keyboard up from the frame so that you can see the  ribbon  still connected.
    • Gently lift the keyboard up from the frame so that you can see the ribbon still connected.

  7. Remove the ribbon by  gently  pulling up the ends of the white receiver it is inserted in to. You may need to use tweezers for this part. During reassembly, when inserting the ribbon, you will hear a quiet, clicking sound when pushing down on the ends of the receiver.  Hearing this ensures the ribbon is in place.
    • Remove the ribbon by gently pulling up the ends of the white receiver it is inserted in to.

    • You may need to use tweezers for this part.

    • During reassembly, when inserting the ribbon, you will hear a quiet, clicking sound when pushing down on the ends of the receiver. Hearing this ensures the ribbon is in place.

结论

To reassemble your device, follow these instructions in reverse order starting at step 5.

另外一个人完成了本指南。

Eric Beaudry

于2018年03月06日注册

757 信誉积分

创作了3篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 45