简介

This guide shows how to take apart the HP Pavilion X2 laptop to expose the SSD card to replace it with a new one.

Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly.
  • Using the blue plastic opening tool or a flat bladed tool, carefully slide the blade in between the display panel and gently slide to prop open the assembly.

添加评论

Gently lift and remove the display panel from the assembly.
  • Gently lift and remove the display panel from the assembly.

添加评论

  • Remove the tape that covers the battery connector on the system board and carefully disconnect the battery cable from its connector on the system board.

添加评论

  • Carefully disconnect the white ribbon cable from the system board.

添加评论

  • Using the Phillips #0 screwdriver, carefully remove the 4 corner screws that hold the battery to the display panel.

  • 3 screws are 3.12 mm head, 2.40 mm length, and 1 screw is 5.85mm head, 2.5mm length.

  • Remove the battery from the device.

How do you replace those magnets that help snap the laptop's into place?

Alfa Orellana - 回复

  • To unscrew the SSD card use the Phillips #0 Screwdriver to remove two types of screws. Three 4.15mm head, 2.35mm in length screws and three 3.32mm head, 3.99mm in length screws

添加评论

  • Remove the SSD card.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

David Zambrano

于2017年09月28日注册

624 信誉积分

创作了5篇指南

团队

USF Tampa, Team S13-G4, Boczar Fall 2017 USF Tampa, Team S13-G4, Boczar Fall 2017 的会员

USFT-BOCZAR-F17S13G4

4 名成员

创作了5篇指南

Is this about the WiFi card? Because I cant see the SSD in any of your pictures.

Julian Lemmerich - 回复

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 54

过去的30天: 275

总计 2,037