修复你的物品 社区 商店

HP Pavilion g7-2275dx RAM Replacement

简介

One of the easiest ways to speed up your computer is to add more RAM. This guide will walk you through how to replace the RAM in your laptop.

Be sure that you buy the right type of RAM. The g7-2275 dx supports two stick of RAM, up to 8 GB. It takes 204-pin SODIMM DDR3 PC3-10600 1333MHz RAM.

For more information about RAM, check out iFixit's RAM page

你所需要的

  1. HP Pavilion g7-2275dx RAM Replacement, Battery: 步骤 1 中的图像 1，1

    • Working on your device while it is turned on may result in electric shock. Make sure to shut down and unplug your device before you begin.

    • Flip your device over so the bottom panel is facing up.

    编辑

  2. HP Pavilion g7-2275dx RAM Replacement: 步骤 2 中的图像 1，1

    • The battery is held in by a latch in the front and tabs in the back.

    • Slide the lock switch left, towards the center of the computer.

    • Lift up the battery, rotating it up and away from you, then pull it out.

    • To put the battery back in, line it up with the battery bay and the holes for the tabs. Then let the battery rotate towards you and press down until the latch engages and you hear a click.

    编辑

  4. HP Pavilion g7-2275dx RAM Replacement, Disassembling HP Pavilion g7-2275dx Back Panel: 步骤 3 中的图像 1，1

    • Unscrew one Phillips #1 screw from the back panel.

    • The screw is on a spring and attached to the panel. It will pop up, but will not separate from the back panel.

    编辑

  5. HP Pavilion g7-2275dx RAM Replacement: 步骤 4 中的图像 1，2 HP Pavilion g7-2275dx RAM Replacement: 步骤 4 中的图像 2，2

    • Slide the back panel down and pull it up.

    编辑

  6. HP Pavilion g7-2275dx RAM Replacement, RAM: 步骤 5 中的图像 1，2 HP Pavilion g7-2275dx RAM Replacement, RAM: 步骤 5 中的图像 2，2

    • Use your fingers, plastic opening tools, or pliers to pull the silver brackets away from the RAM.

    • The RAM should pop up to a 35 degree angle.

    编辑

  7. HP Pavilion g7-2275dx RAM Replacement: 步骤 6 中的图像 1，2 HP Pavilion g7-2275dx RAM Replacement: 步骤 6 中的图像 2，2

    • Gently pull the RAM straight out in the direction it currently is orientated.

    • When inserting new RAM, place the RAM in the black housing at a 35 degree angle (it will fit loosely), then push down until it clicks into the silver brackets.

    • This computer supports two sticks of RAM. To add a second stick, repeat the above step with the upper black housing. (Ensure that you have the correct size and type of RAM before trying to add it).

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与5其他贡献者

John Sutton

于04/24/14注册

1,566 声望

创作了8篇指南

徽章: 17

+ 14更多徽章

团队

Cal Poly, Team 11-51, Amido Spring 2014 Cal Poly, Team 11-51, Amido Spring 2014 的会员

CPSU-AMIDO-S14S11G51

4 名成员

创作了21篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 5

总计 1,389