跳转到主内容

简介

The large back panel contains a lot of screws that help keep it in tact. It covers and protects the majority of your device's insides. It can be somewhat tricky to remove.

配件

没有特定配件。

  1. Slide pill shaped tab to the other side of the channel.
    • Slide pill shaped tab to the other side of the channel.

    • Remove battery while keeping the tab to the side.

  2. Unscrew the two screws JIS #0 located on opposites sides of the panel.
    • Unscrew the two screws JIS #0 located on opposites sides of the panel.

    • Screws are attached to the panel and will not fully come out.

  3. Carefully pry off the L-shaped panel.
    • Carefully pry off the L-shaped panel.

  4. Unscrew all nine 6.0mm JIS #0 screws located on the border of the back panel.
    • Unscrew all nine 6.0mm JIS #0 screws located on the border of the back panel.

  5. Remove 3 screws located where the battery previously was.
    • Remove 3 screws located where the battery previously was.

  6. Remove 6 screws located under the spot where the smaller L-shaped panel was located. Remove 6 screws located under the spot where the smaller L-shaped panel was located.
    • Remove 6 screws located under the spot where the smaller L-shaped panel was located.

  7. Slowly pry off the keyboard from the back panel.
    • Slowly pry off the keyboard from the back panel.

    • Between the back panel and the keyboard there are two ribbon wires.

    • Remove slowly to not break the back panel. If it does not come off easily, check to see if all screws are removed.

  8. Unplug wires connecting back panel to keyboard.
    • Unplug wires connecting back panel to keyboard.

结论

To reassemble your device, follow these instructions in reverse order.

Robert Hamilton

于2018年03月01日注册

1,051 信誉积分

创作了10篇指南

团队

UMass Dartmouth, Team S2-G7, Simcock Spring 2018 UMass Dartmouth, Team S2-G7, Simcock Spring 2018 的会员

UMASSD-SIMCOCK-S18S2G7

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 231