简介

Replace the optical drive assembly in your HP Pavilion dv6000.

配件

无需配件。

  1. Before proceeding, it is recommended to remove the battery to prevent any electrical damage to components.
    • Before proceeding, it is recommended to remove the battery to prevent any electrical damage to components.

    • Remove the single 5.6 mm Phillips screw securing the optical drive to the lower case.

    添加评论

  2. Insert the tip of an unrolled paper clip into the small hole located on the side of the optical drive.
    • Insert the tip of an unrolled paper clip into the small hole located on the side of the optical drive.

    • The tray will partially pop out of the laptop.

    • Firmly pull the drive straight away from the laptop.

    • While pulling the drive out, be careful not to bend the sliding rails on both sides of the optical drive.

    • At this point you can remove the entire optical drive, or you can continue to disassemble the optical drive assembly.

    添加评论

    • Remove the three 3.2 mm screws securing the top plate of the optical drive.

    • Lift and remove the top plate up off the optical drive.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Lift and remove the optical drive assembly.

    • It may be helpful to gently "rock" the drive assembly side to side to dislodge it from its recess.

    • For the rest of the guide, be careful to not touch any of the circuitry on the board as well as the laser lens!

    添加评论

    • Flip the drive over.

    • Pull the small ribbon cable straight away from its socket on the optical drive assembly board.

    添加评论

    • Use your fingernail to flip up the cable retaining flap on the ZIF socket for the larger ribbon cable.

    • Pull the larger ribbon cable straight out of its socket on the optical drive assembly board.

    添加评论

    • Lift and remove the optical drive assembly from the optical drive framework.

    • Optical drive assembly remains.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Ben Hirsch

于2010年10月05日注册

3,634 信誉积分

创作了10篇指南

团队

Cal Poly, Team 21-33, Regan Fall 2010 Cal Poly, Team 21-33, Regan Fall 2010 的会员

CPSU-REGAN-F10S21G33

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 10

总计 6,567