HP Pavilion Wave 600-a014 System Fan Replacement - iFixit 维修指南

简介

Is your HP Pavilion Wave fan malfunction or humming too loud? If that's the case, it can be fix by simply replacing the one and only system fan.

你所需要的

步骤 1 Hard Drive

HP Pavilion Wave 600-a014 System Fan Replacement, Hard Drive: 步骤 1 中的图像 1，1

Disconnect the PC from power source and any other devices.

步骤 2

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 2 中的图像 1，2

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 2 中的图像 2，2

Turn the computer over and remove the rubber feet.
Remove the three 8mm Philips screws with a Philips #0 Screwdriver.
Use a pry tool and lift up on the lid.

步骤 3

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 3 中的图像 1，2

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 3 中的图像 2，2

Remove the two cables circled in red for the front IO panel.

步骤 4

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 4 中的图像 1，2

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 4 中的图像 2，2

From back IO panel pry open the casing as indicated.

步骤 5

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 5 中的图像 1，3

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 5 中的图像 2，3

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 5 中的图像 3，3

To remove the hard drive, remove the four 8mm Philips screws using a Philips #0 Screwdriver.
Remove Power and SATA cables from on top of the drive.

步骤 6

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 6 中的图像 1，1

After screws have been removed grab the Hard Drive and pull it out of the dock.

步骤 7 System Fan

HP Pavilion Wave 600-a014 System Fan Replacement, System Fan: 步骤 7 中的图像 1，2

HP Pavilion Wave 600-a014 System Fan Replacement, System Fan: 步骤 7 中的图像 2，2

After removing your hard drive, remove the two 1.2mm Phillips #1 screws from the bottom of your case .

步骤 8

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 8 中的图像 1，2

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 8 中的图像 2，2

Remove the 8 mm Phillips #0 screw that is connected the top bezel and the top cover using the driver kit.

步骤 9

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 9 中的图像 1，2

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 9 中的图像 2，2

Using a flathead screwdriver, remove the 8 mm Phillips #1 screw that connects the body casing and the top bezel(the one at the bottom of memory card slot).

步骤 10

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 10 中的图像 1，1

Remove the top bezel.
You will have to take off a pair of wire connecting the bezel with the body to be able to completely detach it.

步骤 11

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 11 中的图像 1，3

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 11 中的图像 2，3

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 11 中的图像 3，3

Turn the device to the top side where you can see the top cover and the speaker.
Using a flathead or Phillips #1 screwdriver, unscrew all the eight 8.0 mm screws that connect the top cover to the other components of the casing.
Gently remove the top cover.

步骤 12

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 12 中的图像 1，3

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 12 中的图像 2，3

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 12 中的图像 3，3

After removing the top cover, locate the system fan on the left side of memory compartment.
Remove three 1.2 cm Phillips #1 screws that connect the fan with the main body.

步骤 13

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 13 中的图像 1，2

HP Pavilion Wave 600-a014 System Fan Replacement: 步骤 13 中的图像 2，2

Simply slide up the fan after removing the screws.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Kyaw Soe

于09/27/17注册

321 声望

创作了2篇指南

+ 7更多徽章

团队

Cal Poly, Team S8-G4, Banghart Fall 2017 Cal Poly, Team S8-G4, Banghart Fall 2017 的会员

CPSU-BANGHART-F17S8G4

4 名成员

创作了5篇指南

0条评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 6

过去 30 天： 18

总计 1,154