修复你的物品 社区 商店

HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement

简介

HP Pavilion Wave comes with a pair of built-in mouse and keyboard. This guide shows you how to replace them without using any additional USB-port for your mouse and keyboard.

你所需要的

  1. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement, Front IO Board: 步骤 1 中的图像 1，2 HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement, Front IO Board: 步骤 1 中的图像 2，2

    • Turn over the computer and remove the rubber feet.

    • Remove the 8mm Philips screws indicated in red circles with a Philips #0 screwdriver.

    • Use a pry tool and lift the lid.

    编辑

  2. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: 步骤 2 中的图像 1，2 HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: 步骤 2 中的图像 2，2

    • Pry open the casing from the back of the IO panel, as shown in the pictures.

    编辑

  4. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: 步骤 3 中的图像 1，2 HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: 步骤 3 中的图像 2，2

    • Finally, remove the two cables circled in red from the front IO panel.

    编辑

  5. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement, Mouse and Keyboard adapter: 步骤 4 中的图像 1，1

    • Locate a blue USB adapter on the left side of the hard disk compartment.

    编辑

  6. HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: 步骤 5 中的图像 1，2 HP Pavilion Wave 600-a014 Mouse and Keyboard Replacement: 步骤 5 中的图像 2，2

    • Take off the USB with gentle but firm pressure.

    • This is a single USB adapter for both mouse and keyboard, so you must get a wireless mouse and keyboard pair, or you will have to use the extra USB for the other one.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与1其他贡献者

Kyaw Soe

于09/27/17注册

321 声望

创作了2篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team S8-G4, Banghart Fall 2017 Cal Poly, Team S8-G4, Banghart Fall 2017 的会员

CPSU-BANGHART-F17S8G4

4 名成员

创作了5篇指南

3条评论

Seems like there might be enough room for a usb 2 port hub/splitter (such as Onvian USB Splitter Cable Male to 2 Female Adapter USB) to add an additional usb dongle (such an RF or Insteon USB)? Can you confirm how much room there are?

thomastranrx - 回复

Since it's a year old project, I forgot most of the dimensions, but from my memory, it would be possible since it's located in a little groove that can probably fit a wire or two. (You can see it in step one picture)

Kyaw Soe - 回复

Can i purchase this dongle anywhere? Is there any documentation on how to pair?

will - 回复

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 6

过去 30 天： 25

总计 2,317