跳转到主内容

简介

This guide demonstrates how to properly replace your HP Pavilion Sleekbook 15 Screen.

  1. Unplug the device before working on it. Begin by opening the laptop and locating the circular rubber covers at the bottom corners of the screen. Remove the rubber circles by peeling them away from the laptop revealing two black screws. Save the rubber circles for later when you reassemble the screen. Remove the rubber circles by peeling them away from the laptop revealing two black screws. Save the rubber circles for later when you reassemble the screen.
    • Unplug the device before working on it. Begin by opening the laptop and locating the circular rubber covers at the bottom corners of the screen.

    • Remove the rubber circles by peeling them away from the laptop revealing two black screws. Save the rubber circles for later when you reassemble the screen.

  2. Use a screwdriver to remove the two 3.6 mm (smaller) screws from the corners of the devices screen. Use a screwdriver to remove the two 3.6 mm (smaller) screws from the corners of the devices screen. Use a screwdriver to remove the two 3.6 mm (smaller) screws from the corners of the devices screen.
    • Use a screwdriver to remove the two 3.6 mm (smaller) screws from the corners of the devices screen.

  3. Once the screws are removed, use the included plastic pry-tool to separate the edge of the screen from the frame of the laptop. Once the screws are removed, use the included plastic pry-tool to separate the edge of the screen from the frame of the laptop.
    • Once the screws are removed, use the included plastic pry-tool to separate the edge of the screen from the frame of the laptop.

  4. Remove the four 5.7 mm (bigger) screws located towards the corners of the device. Remove the four 5.7 mm (bigger) screws located towards the corners of the device. Remove the four 5.7 mm (bigger) screws located towards the corners of the device.
    • Remove the four 5.7 mm (bigger) screws located towards the corners of the device.

  5. The screen will only be connected by a single cord at the base of the device. Locate and remove the plastic adhesive attached to the cord.  After the plastic is removed, unplug the cord connected to the screen.
    • The screen will only be connected by a single cord at the base of the device. Locate and remove the plastic adhesive attached to the cord. After the plastic is removed, unplug the cord connected to the screen.

结论

To reassemble the device, follow the instructions in the reverse order.

5等其他人完成本指南。

Jonathan

于2015年01月13日注册

755 信誉积分

创作了3篇指南

团队

USF Tampa, Team 3-3, Hickman Winter 2015 USF Tampa, Team 3-3, Hickman Winter 2015 的会员

USFT-HICKMAN-W15S3G3

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 7

总计 3,096