简介

If your laptop is struggling to run multiple tabs, or if you are looking to upgrade your ram, consult this repair guide. To complete this repair guide all you will need is a Philip's head screwdriver.

配件

无需配件。

  1. Turn the device over so that the bottom is facing upward.
    • Turn the device over so that the bottom is facing upward.

    • Locate the three panels near the bottom half of the device.

    • The middle-most panel is the one we will be focusing on.

    • Using a Philips #0 screwdriver, unscrew the two 4mm screws that hold this panel in place.

    添加评论

  2. Pull the bottom of the panel upward.
    • Pull the bottom of the panel upward.

    • Then pull the panel toward yourself to remove.

    添加评论

    • Look toward the top half of the exposed compartment.

    • Each ram stick will have two silver clips on the left and right side.

    • Push these clips outward at the same time to release the ram stick.

    添加评论

    • The ram stick will be held at a 45 degree angle. Pull the stick upward to release it from the slot.

    • Each ram stick will have a notch near the bottom, make sure to keep note of which side this notch is on.

    • Make sure to place the ram away from any static surfaces (carpet, fabric, etc.)

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Max Shangraw

于2018年03月19日注册

495 信誉积分

创作了4篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 6

总计 37