跳转到主内容

简介

This guide will include the steps required in removing the RAM in the HP Pavilion 15-n232nr. This process will require the following tools: screwdriver and iFixit opening tools. This process does not require much expertise, but is rather tedious.

  1. Flip the laptop over. Flip the laptop over.
    • Flip the laptop over.

  2. Slide the battery locks towards the center of the laptop. The battery will detach automatically. Remove the battery by sliding it away from the laptop housing. Remove the battery by sliding it away from the laptop housing.
    • Slide the battery locks towards the center of the laptop. The battery will detach automatically.

    • Remove the battery by sliding it away from the laptop housing.

  3. Loosen the two 6 mm Phillips #1 screws on the back panel. These screws do not detach from back panel.
    • Loosen the two 6 mm Phillips #1 screws on the back panel.

    • These screws do not detach from back panel.

  4. Use the iFixit opening tool to remove the back panel. Use the iFixit opening tool to remove the back panel.
    • Use the iFixit opening tool to remove the back panel.

  5. Release the clips securing the RAM by slightly bending them until the RAM is free. Release the clips securing the RAM by slightly bending them until the RAM is free.
    • Release the clips securing the RAM by slightly bending them until the RAM is free.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Dalton Bowen

于2019年03月18日注册

174 信誉积分

撰写一个指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 142