跳转到主内容

HP Omni 10 Micro Card Reader Board Replacement

你所需要的

  1. HP Omni 10 Micro Card Reader Board Replacement, Battery: 步骤 1 中的图像 1,1
    • Remove the back cover from the tablet.

    • The cover is securely fastened to the device and may be difficult to remove.

  2. HP Omni 10 Micro Card Reader Board Replacement: 步骤 2 中的图像 1,1
    • Push the black plastic security flaps into an upward position.

    • Lift the small tab on the security strips up and peel them across the battery. They will be attached via adhesive.

    • Lift the tab on the strip up and pull it across the battery.

    • The orange strip does not fully detach from the tablet like the other three. It will only detach from one side.

  3. HP Omni 10 Micro Card Reader Board Replacement: 步骤 3 中的图像 1,1
    • Unscrew the ten 3.3 mm screws securing the battery using a 00 Phillip's head screwdriver.

  4. HP Omni 10 Micro Card Reader Board Replacement: 步骤 4 中的图像 1,2 HP Omni 10 Micro Card Reader Board Replacement: 步骤 4 中的图像 2,2
    • Unhook the cord from the edge of the battery.

    • Pull the wire circuit out and down.

  5. HP Omni 10 Micro Card Reader Board Replacement: 步骤 5 中的图像 1,2 HP Omni 10 Micro Card Reader Board Replacement: 步骤 5 中的图像 2,2
    • Lift the battery up by its edges and remove it carefully. There will be adhesive holding the battery down.

  6. HP Omni 10 Micro Card Reader Board Replacement, Micro Card Reader: 步骤 6 中的图像 1,1
    • Unscrew the two 3.3 mm screws using a 00 Phillip's head screwdriver.

  7. HP Omni 10 Micro Card Reader Board Replacement: 步骤 7 中的图像 1,1
    • Lift and remove micro card reader board.

结论

To reassemble your device, follow these instructions in reverse order.

Alex Miller

于10/11/16注册

345 声望

创作了5篇指南

团队

USF Tampa, Team 1-1, Leahy Fall 2016 USF Tampa, Team 1-1, Leahy Fall 2016 的会员

USFT-LEAHY-F16S1G1

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 4

总计 518