修复你的物品 社区 商店

HP Omni 10 Speaker Replacement

简介

Using a spudger and a 00 Phillips head screwdriver, this guide will show how to remove a pair of speakers from an HP Omni 10 tablet in roughly 5 to 7 minutes.

你所需要的

  1. HP Omni 10 Speaker Replacement, Battery: 步骤 1 中的图像 1，1

    • Remove the back cover from the tablet.

    • The cover is securely fastened to the device and may be difficult to remove.

    编辑

  2. HP Omni 10 Speaker Replacement: 步骤 2 中的图像 1，1

    • Push the black plastic security flaps into an upward position.

    • Lift the small tab on the security strips up and peel them across the battery. They will be attached via adhesive.

    • Lift the tab on the strip up and pull it across the battery.

    • The orange strip does not fully detach from the tablet like the other three. It will only detach from one side.

    编辑

  3. HP Omni 10 Speaker Replacement: 步骤 3 中的图像 1，1

    • Unscrew the ten 3.3 mm screws securing the battery using a 00 Phillip's head screwdriver.

    编辑

  4. HP Omni 10 Speaker Replacement: 步骤 4 中的图像 1，2 HP Omni 10 Speaker Replacement: 步骤 4 中的图像 2，2

    • Unhook the cord from the edge of the battery.

    • Pull the wire circuit out and down.

    编辑

  6. HP Omni 10 Speaker Replacement: 步骤 5 中的图像 1，2 HP Omni 10 Speaker Replacement: 步骤 5 中的图像 2，2

    • Lift the battery up by its edges and remove it carefully. There will be adhesive holding the battery down.

    编辑

  7. HP Omni 10 Speaker Replacement, Micro Card Reader: 步骤 6 中的图像 1，1

    • Unscrew the two 3.3 mm screws using a 00 Phillip's head screwdriver.

    编辑

  8. HP Omni 10 Speaker Replacement: 步骤 7 中的图像 1，1

    • Lift and remove micro card reader board.

    编辑

  9. HP Omni 10 Speaker Replacement, Speaker: 步骤 8 中的图像 1，1

    • Unscrew the four 3.3 mm screws using a 00 Phillip's head screwdriver.

    编辑

  10. HP Omni 10 Speaker Replacement: 步骤 9 中的图像 1，2 HP Omni 10 Speaker Replacement: 步骤 9 中的图像 2，2

    • Pull the black and white wire connector up to disconnect it.

    编辑

  11. HP Omni 10 Speaker Replacement: 步骤 10 中的图像 1，2 HP Omni 10 Speaker Replacement: 步骤 10 中的图像 2，2

    • Pull the red and black wire connector up to disconnect it.

    编辑

  12. HP Omni 10 Speaker Replacement: 步骤 11 中的图像 1，1

    • Lift the speaker set out of their sockets.

    • The speakers will also be attached via adhesive. They may be difficult to remove by hand.

    编辑

  13. HP Omni 10 Speaker Replacement: 步骤 12 中的图像 1，1

    • Unhook the left speaker's connector wire to fully remove it from the device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

Alex Miller

于10/11/16注册

345 声望

创作了5篇指南

徽章: 11

+ 8更多徽章

团队

USF Tampa, Team 1-1, Leahy Fall 2016 USF Tampa, Team 1-1, Leahy Fall 2016 的会员

USFT-LEAHY-F16S1G1

3 名成员

创作了10篇指南

一条评论

its order when i will get it please candly I request

Abdul Raheem - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 13

总计 587