简介

The CMOS battery is an on-board memory storage battery. If you're HP Officejet Pro 8625 is losing data frequently or shutting off randomly, you may need to replace the CMOS battery. Removing the CMOS battery will reset all settings to default.

配件

无需配件。

  1. Remove the two 11.6 mm T9 screws from the right side of the back of the printer.
    • Remove the two 11.6 mm T9 screws from the right side of the back of the printer.

    添加评论

  2. Pull down the front panel to expose the screws on the front.
    • Pull down the front panel to expose the screws on the front.

    • Remove the one 11.6 mm T9 screw on the left side of the front face.

    添加评论

    • Remove the side panel by pushing down and towards the back.

    • This step may be easier if the printer is laid on its side with the left side panel facing up.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the three 5.3 mm T9 screws from the motherboard.

    • Remove the one 6.7 mm T9 screw from the motherboard.

    添加评论

    • Remove the connectors from the front and sides of the motherboard by pulling straight away from the connection.

    添加评论

    • Lift the bottom of the motherboard and remove the connectors from the back.

    • Remove the motherboard.

    • There are two white connectors underneath the motherboard, remove them separately.

    添加评论

    • Locate the CMOS battery on the motherboard.

    • Remove the CMOS battery by pinching the top and pulling away from the motherboard.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Cam Engle

于2018年10月08日注册

387 信誉积分

创作了3篇指南

团队

Cal Poly, Team S13-G3, White Fall 2018 Cal Poly, Team S13-G3, White Fall 2018 的会员

CPSU-WHITE-F18S13G3

3 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 15

总计 46