修复你的物品 社区 商店

HP Officejet Pro 8600 Plus Power Source Adapter Replacement

撰写者： Karissa Roof (和另外4个贡献者)
  • 评论： 0
  • 收藏 0
  • 完成 5

难度

困难

步骤

10

所需时间

25分钟

节

1

标志

0

简介

The Power Source Adapter on the HP Officejet Pro 8600 plus may have connection issues after wear and repeated use. This guide describes how to replace the Power Source Adapter.

  1. Turn the printer so the back is facing you. Put the printer in a vertical position by lifting its right side.

    • Turn the printer so the back is facing you.

    • Put the printer in a vertical position by lifting its right side.

    编辑

  2. Remove the two 12mm-T10 Torx screws on the top edge of the printer.

    • Remove the two 12mm-T10 Torx screws on the top edge of the printer.

    编辑

  3. Rotate the printer clockwise so the bottom of the printer is facing you.

    • Rotate the printer clockwise so the bottom of the printer is facing you.

    编辑

  4. Insert the plastic opening tool underneath the slot on the right that aligns with the edge of the back panel. Insert a second plastic opening tool in the notch lining up with the crease in the back panel.

    • Insert the plastic opening tool underneath the slot on the right that aligns with the edge of the back panel.

    • Insert a second plastic opening tool in the notch lining up with the crease in the back panel.

    • This step requires applying a significant amount of force on the left notch. Don't be alarmed if you hear popping noises.

    编辑

  6. Remove the side panel from the printer by lifting upwards toward you.

    • Remove the side panel from the printer by lifting upwards toward you.

    • For reassembly, slide the side panel from left to right into place.

    编辑

  7. Rotate the printer to its standard position. Rotate the printer to its standard position. Rotate the printer to its standard position.

    • Rotate the printer to its standard position.

    编辑

  8. Unplug the black wire with the white cap connecting the power supply to the motherboard. Unplug the black wire with the white cap connecting the power supply to the motherboard. Unplug the black wire with the white cap connecting the power supply to the motherboard.

    • Unplug the black wire with the white cap connecting the power supply to the motherboard.

    编辑

  9. Remove the two 12mm-T10 Torx screws from the base of the power supply mount.

    • Remove the two 12mm-T10 Torx screws from the base of the power supply mount.

    编辑

  10. Place your left hand on the left side of the power supply through the opening in the side of the printer. Place your left hand on the left side of the power supply through the opening in the side of the printer.

    • Place your left hand on the left side of the power supply through the opening in the side of the printer.

    编辑

  11. Grab the base of the cable on the right side of the power supply with your right hand. Remove the power supply by pulling your right hand toward you and pushing your left fingers toward you. Remove the power supply by pulling your right hand toward you and pushing your left fingers toward you.

    • Grab the base of the cable on the right side of the power supply with your right hand.

    • Remove the power supply by pulling your right hand toward you and pushing your left fingers toward you.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

作者

与4其他贡献者

Karissa Roof

于2018年04月18日注册

208 信誉积分

撰写一个指南

徽章: 5

+ 2更多徽章

团队

Cal Poly, Team S16-G4, Livingston Spring 2018 Cal Poly, Team S16-G4, Livingston Spring 2018 的会员

CPSU-LIVINGSTON-S18S16G4

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 11

过去的30天： 70

总计 3,730