跳转到主内容

HP Officejet Pro 6835 Speaker Replacement

你所需要的

  1. HP Officejet Pro 6835 Speaker Replacement, HP Officejet Pro 6835 Cover Disassembly: 步骤 1 中的图像 1,1
    • Open the main lid as far as it will go.

    • Use a plastic opening tool to gently pry off the hinge on the right side by pushing it to the left and off the hook.

    • Open the lid further.

  2. HP Officejet Pro 6835 Speaker Replacement: 步骤 2 中的图像 1,3 HP Officejet Pro 6835 Speaker Replacement: 步骤 2 中的图像 2,3 HP Officejet Pro 6835 Speaker Replacement: 步骤 2 中的图像 3,3
    • Use a T9 torx screwdriver to remove a total of ten (10) 12mm screws from the main cover by turning the screwdriver counterclockwise.

    • The two screws above the screen assembly are deep so you may need a long screwdriver.

  3. HP Officejet Pro 6835 Speaker Replacement: 步骤 3 中的图像 1,1
    • Grab the main cover and lift it up slightly.

    • Do not pull too hard—there is a cable connecting the cover to the printer.

  4. HP Officejet Pro 6835 Speaker Replacement: 步骤 4 中的图像 1,2 HP Officejet Pro 6835 Speaker Replacement: 步骤 4 中的图像 2,2
    • Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out.

  5. HP Officejet Pro 6835 Speaker Replacement, Speaker: 步骤 5 中的图像 1,3 HP Officejet Pro 6835 Speaker Replacement, Speaker: 步骤 5 中的图像 2,3 HP Officejet Pro 6835 Speaker Replacement, Speaker: 步骤 5 中的图像 3,3
    • Grab the intertwined red and black wires. Gently pull up and disconnect the wires from the motherboard.

    • Be careful to remove the wires from the socket, NOT the socket from the board.

  6. HP Officejet Pro 6835 Speaker Replacement: 步骤 6 中的图像 1,1
    • Carefully slide the speaker out of the printer.

结论

To reassemble your device, follow these instructions in reverse order.

David J

于01/24/18注册

169 声望

创作了2篇指南

团队

Cal Poly, Team S2-G4, Livingston Winter 2018 Cal Poly, Team S2-G4, Livingston Winter 2018 的会员

CPSU-LIVINGSTON-W18S2G4

4 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 3

过去 30 天: 6

总计 268