简介
The sensor chip is a small, green chip located in the top-right corner inside printer. It is held in by a small screw.
你所需要的
-
-
Open the main lid as far as it will go.
-
Use a plastic opening tool to gently pry off the hinge on the right side by pushing it to the left and off the hook.
-
Open the lid further.
-
-
-
-
Twist the screwdriver counter-clockwise to remove the T9 screw on the sensor chip.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。