简介
The speaker in your printer could wear out and stop working. This guide will show how to replace the speaker if it stops working. This process will require soldering skills because unplugging the speaker from the control board is a very difficult process.
你所需要的
-
-
-
Peel the model sticker off the cover.
-
This will expose the T10 screw securing the panel.
-
-
-
Remove the clip that keeps the printer lid from opening all the way with your hands by pulling away from the post on the lid.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.