跳转到主内容

简介

Paper trays are easy to break but thankfully it is an easy repair with only one tool required.

配件

没有特定配件。

  1. Begin by turning your printer upside down.
    • Begin by turning your printer upside down.

    • It can be helpful to position an object beneath the printer to keep it level while you work on it.

  2. Use the T-10 screwdriver to remove the two 11-mm screws.
    • Use the T-10 screwdriver to remove the two 11-mm screws.

  3. Pull the paper tray out until it hits the stops on either side of the tray.
    • Pull the paper tray out until it hits the stops on either side of the tray.

  4. Lift up on one side of the black plastic bar with one hand while pulling the paper tray out of the printer with your other hand. The side of the tray should slide away from the printer a little bit. The side of the tray should slide away from the printer a little bit.
    • Lift up on one side of the black plastic bar with one hand while pulling the paper tray out of the printer with your other hand.

    • The side of the tray should slide away from the printer a little bit.

  5. Repeat the previous step but for the other side of the tray. Repeat the previous step but for the other side of the tray.
    • Repeat the previous step but for the other side of the tray.

  6. The paper tray should now be free to slide away from the printer.
    • The paper tray should now be free to slide away from the printer.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Tyler Allen

于2018年01月24日注册

351 信誉积分

创作了2篇指南

团队

Cal Poly, Team S18-G3, Livingston Winter 2018 Cal Poly, Team S18-G3, Livingston Winter 2018 的会员

CPSU-LIVINGSTON-W18S18G3

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 6

过去的30天: 25

总计 592