菜单

你的设置

HP Mini 210-2070NR Hard Drive Replacement

撰写者： Alek Linquist (和另外4个贡献者)
  • 评论： 0
  • 收藏 3
  • 完成 3

难度

中等

步骤

9

所需时间

20分钟

节

2

标志

4

Markup Mishap

标记错误

本指南需要更好的标记。请帮助纠正或制作一些标记批注。

Slice and Dice

详尽分析

本指南中的步骤应该被分开，并制作成一系列的前提条件指南。

Grammar Police

语法警察

发挥你内在的英语语法能力，帮助提高本指南语法准确性！

Confusing Text

令人困惑的文字

本指南的一些文字是混乱的，重复的，或偏离主题。请通过编辑使其明确！

简介

Use this guide to remove and install a new hard drive.

工具

购买这些工具

配件

没有特定配件。

  1. Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

    • Before beginning, make sure that your computer is turned off and all external power cords are disconnected.

    • Close the laptop and turn it over, so that the underside is up and the silver battery bay is facing towards you.

    编辑

  2. Locate the battery locking latch on the bottom right corner and slide it inward to unlock the battery. Locate the battery release latch on the bottom left and slide it inward. Pull the battery towards you to remove it from the laptop.

    • Locate the battery locking latch on the bottom right corner and slide it inward to unlock the battery.

    • Locate the battery release latch on the bottom left and slide it inward.

    • Pull the battery towards you to remove it from the laptop.

    编辑

  3. Locate the service access cover release lever and slide it to the right. While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop. While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop.

    • Locate the service access cover release lever and slide it to the right.

    • While holding the lever to the right, lift up the laptop's bottom cover gently and remove the cover from the laptop.

    编辑

  5. If you are performing any installations after the battery, orient the computer so that the underside is up, and the battery port is facing away from you.

    • If you are performing any installations after the battery, orient the computer so that the underside is up, and the battery port is facing away from you.

    编辑

  6. Locate the HP product sticker, a black square sticker covered with product details, at the top of the computer. Pull off the HP product sticker, starting at the top right corner and pulling diagonally down towards the bottom right. Be careful not to pull up the black hard drive plastic connector with the sticker. Also, removing this sticker will void your warranty.

    • Locate the HP product sticker, a black square sticker covered with product details, at the top of the computer.

    • Pull off the HP product sticker, starting at the top right corner and pulling diagonally down towards the bottom right.

    • Be careful not to pull up the black hard drive plastic connector with the sticker. Also, removing this sticker will void your warranty.

    • Remove the HP product sticker.

    编辑

  7. Locate the hard drive, where the HP Product sticker used to be. Locate the hard drive cable, connected to the hard drive.

    • Locate the hard drive, where the HP Product sticker used to be.

    • Locate the hard drive cable, connected to the hard drive.

    • Disconnect the hard drive cable by gently pulling upward.

    编辑

  8. Using a 00 Phillips screwdriver, unscrew and remove the three 2.0 x 4.0 Philips screws holding the hard drive in place. Using a 00 Phillips screwdriver, unscrew and remove the three 2.0 x 4.0 Philips screws holding the hard drive in place.

    • Using a 00 Phillips screwdriver, unscrew and remove the three 2.0 x 4.0 Philips screws holding the hard drive in place.

    编辑

  9. Use the Mylar Tab located on the right side of the hard drive to pry up the hard drive. Remove the hard drive.

    • Use the Mylar Tab located on the right side of the hard drive to pry up the hard drive.

    • Remove the hard drive.

    编辑

  10. Lay the hard drive down with the underside facing up.

    • Lay the hard drive down with the underside facing up.

    • Pull and remove the hard drive pin connector from the hard drive.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与4其他贡献者

Alek Linquist

于2012年10月05日注册

108 信誉积分

创作了2篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 3-23, Amido Fall 2012 Cal Poly, Team 3-23, Amido Fall 2012 的会员

CPSU-AMIDO-F12S3G23

4 名成员

创作了6篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 2

总计 1,937