跳转到主内容

简介

This guide will show users how to replace the keyboard for an HPG62-347NR laptop. You will need a Phillips #1 screwdriver and a prying tool.

  1. Make sure the device is turned off before removing the battery to avoid loss or corruption of files.
    • Make sure the device is turned off before removing the battery to avoid loss or corruption of files.

    • Turn the device over so the bottom is facing up.

    • Slide the battery release to the left until you hear a click.

    • Once you hear a click, the battery will have been released from the battery compartment.

  2. Remove the battery, carefully, from the compartment.
    • Remove the battery, carefully, from the compartment.

  3. Find the hard drive compartment with two Phillips head screws. Use the PH1 screwdriver to loosen and remove both screws.
    • Find the hard drive compartment with two Phillips head screws.

    • Use the PH1 screwdriver to loosen and remove both screws.

    • Gently remove the hard drive compartment.

  4. Locate the three Phillips head screws on the compartment with the wifi and keyboard logos. Using the Phillips #1 screwdriver, remove the three screws.
    • Locate the three Phillips head screws on the compartment with the wifi and keyboard logos.

    • Using the Phillips #1 screwdriver, remove the three screws.

  5. Locate the two keyboard logos on back of the computer. Find the Phillips head screws in the hole next to the logo.
    • Locate the two keyboard logos on back of the computer.

    • Find the Phillips head screws in the hole next to the logo.

    • Remove the two screws using a Phillips #1 screwdriver.

  6. In the battery compartment, locate the three keyboard logos. Find the Phillips head screws next to each logo.
    • In the battery compartment, locate the three keyboard logos.

    • Find the Phillips head screws next to each logo.

    • Remove the three screws using the Phillips #1 screwdriver.

  7. Place the plastic opening tool between the keyboard and the motherboard. Gently pry the entire keyboard up and away from the laptop's motherboard.
    • Place the plastic opening tool between the keyboard and the motherboard.

    • Gently pry the entire keyboard up and away from the laptop's motherboard.

    • Once you have part of the keyboard separated, run your fingers around the edge of the keyboard to separate the entire thing.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

McKenzi Morris

于2016年10月10日注册

487 信誉积分

创作了3篇指南

团队

Texas Tech, Team 6-1, Bennett Fall 2016 Texas Tech, Team 6-1, Bennett Fall 2016 的会员

TTU-BENNETT-F16S6G1

3 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 20

总计 2,159