修复你的物品 社区 商店

HP Envy x360 15m-cn0012dx TrackPad Replacement

简介

If your HP Envy x360 m Convertible (Model 15m-cn0012dx) trackpad is not responding use this guide to replace it

A faulty trackpad does not respond to touch or can be lagging.

Before starting, make sure all external connections are unplugged and the computer is turned off.

你所需要的

  1. HP Envy x360 15m-cn0012dx TrackPad Replacement, TrackPad: 步骤 1 中的图像 1，2 HP Envy x360 15m-cn0012dx TrackPad Replacement, TrackPad: 步骤 1 中的图像 2，2

    • Make sure the computer is turned off, and remove all cables.

    • Set the laptop face down.

    • Peel back the grey screw guards, along the top and bottom edge of the back case. It may be helpful to use a spudger to get started.

    • Peel slowly to avoid tearing the rubber covers.

    翻译

  2. HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 2 中的图像 1，3 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 2 中的图像 2，3 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 2 中的图像 3，3

    • Using the Phillips #0 screwdriver, remove the seven 5mm screws from the back case.

    翻译

  3. HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 3 中的图像 1，3 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 3 中的图像 2，3 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 3 中的图像 3，3

    • Pry open the back cover using the iFixit Opening Tool.

    • While using the tool, place a pick at each corner of the computer (be careful and do it slowly).

    • Once all the corners are slightly lifted, carefully pop off the back cover.

    翻译

  5. HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 4 中的图像 1，2 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 4 中的图像 2，2

    • The battery rest above the trackpad and connects to the black port with the gold pins at the bottom right corner of the motherboard.

    • Remove the screws around the perimeter of the battery holding it down with a Phillips #0 screwdriver.

    • Disconnect the battery cable from the motherboard.

    • Remove the battery by lifting it out of the laptop case.

    翻译

  6. HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 5 中的图像 1，2 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 5 中的图像 2，2

    • Using a Phillips #0 screwdriver, remove the four 4mm screws from the metal plate covering the bottom edge of the trackpad.

    • Using a Phillips #0 screwdriver, remove the three 4mm screws from the top edge of the trackpad.

    • Remove the metal plate.

    翻译

  7. HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 6 中的图像 1，3 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 6 中的图像 2，3 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 6 中的图像 3，3

    • Use the iFixit opening tool, lift up the black lock tab of the ZIF connector.

    • Pull out the ribbon cable from the trackpad connector.

    翻译

  8. HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 7 中的图像 1，2 HP Envy x360 15m-cn0012dx TrackPad Replacement: 步骤 7 中的图像 2，2

    • Remove the trackpad from the device, lifting the bottom edge first.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Grace Daleki

于02/04/20注册

487 声望

创作了3篇指南

徽章: 10

+ 7更多徽章

团队

UW Stout, Team S1-G3, Schneider-Bateman Spring 2020 UW Stout, Team S1-G3, Schneider-Bateman Spring 2020 的会员

UWSTOUT-SCHNEIDER-BATEMAN-S20S1G3

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 22

总计 675