简介

The fan can become jammed with debris or stop working over time, causing the device to overheat.

Power off your laptop before beginning disassembly.
  • Power off your laptop before beginning disassembly.

  • Pry off the 2 rear rubber pads (closest to the laptop hinge) using the plastic opening tool to reveal two screws.

  • Remove the 2 anti-tamper proof covers using the spudger to reveal two screws.

添加评论

Remove the fourteen 7mm screws using the Phillips #0 screwdriver from the bottom of the laptop.
  • Remove the fourteen 7mm screws using the Phillips #0 screwdriver from the bottom of the laptop.

添加评论

  • Turn the device right side up and open the lid.

  • Insert the plastic opening tool in between the keyboard plate and the base of laptop.

  • Run the tool along seem, prying up as you go.

  • Separate the keyboard plate from the base, lifting from the front.

添加评论

  • There are 3 ribbon cables (black, white, and copper color) connecting the computer to the keyboard plate. Disconnect the 3 ribbon cables using the plastic opening tool by prying up the latches holding each cable in place.

  • Remove the keyboard plate from the device.

添加评论

  • Remove the thick white ribbon cable covering the battery using the plastic opening tool by prying up the latches attaching each end.

添加评论

  • Remove the three 4mm screws using the Phillips #0 screwdriver.

添加评论

  • Disconnect the battery from the motherboard.

  • There may be tamper-proof tape holding the battery in place. Remove the tape if present.

  • Remove the battery from the device.

添加评论

  • Remove the three 4mm screws using the Phillips #0 screwdriver from the device fan.

添加评论

  • Disconnect the fan from the motherboard using the spudger.

  • Remove the fan from the device.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 4

过去的30天: 23

总计 80