修复你的物品 社区 商店

HP Envy x360 15-bp143cl Motherboard Replacement

简介

This guide will show you how to replace the motherboard on your HP Envy laptop. There are two main reason for doing this, you can upgrade your board, or fix a bad one. Without further ado, let us begin.

你所需要的

  1. HP Envy x360 15-bp143cl Motherboard Replacement, Battery: 步骤 1 中的图像 1，1

    • Flip the laptop over.

    • Peel off the rubber strip closest to the hinges.

    编辑

  2. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 2 中的图像 1，1

    • Use a Phillips #1 screwdriver (PH1 bit) to remove the four 6.5mm screws that were underneath the rubber strip.

    编辑

  3. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 3 中的图像 1，1

    • Use a Torx T5 screwdriver (T5 bit) to remove the three 5mm screws near the bottom edge of the laptop.

    编辑

  4. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 4 中的图像 1，1

    • Lift the back panel to remove it from the laptop.

    • Use an opening tool to pry open the back panel if it does not easily lift apart.

    编辑

  6. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 5 中的图像 1，2 HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 5 中的图像 2，2

    • Use a Phillips #1 screwdriver (PH1) to remove the seven 4mm screws indicated by the gray arrows on the battery.

    编辑

  7. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 6 中的图像 1，1

    • Pull the battery from the connecting port and lift to remove it from the laptop.

    编辑

  8. HP Envy x360 15-bp143cl Motherboard Replacement, Motherboard: 步骤 7 中的图像 1，1

    • Peel off the tape securing the heatsink.

    编辑

  9. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 8 中的图像 1，1

    • Use a Phillips #1 screwdriver to remove the seven 4 mm screws securing the fan.

    • Detach the fan cable from the mother board.

    编辑

  10. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 9 中的图像 1，1

    • Lift the fan up and off the motherboard.

    编辑

  11. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 10 中的图像 1，1

    • Use a Phillips #1 screwdriver to remove the ten 4 mm screws securing the motherboard.

    • Pull the four cables directly out of their ports.

    • Flip up the lock-bar on the two ZIF connectors, then gently pull the two ribbon cables directly out of their ports.

    编辑

  12. HP Envy x360 15-bp143cl Motherboard Replacement: 步骤 11 中的图像 1，1

    • Gently lift the motherboard up and out of the chassis.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 29

总计 791