修复你的物品 社区 商店

HP Envy x2 13-j002dx Battery Replacement

简介

In this guide we will be opening up the HP Envy x2 13-j002dx and replacing the battery. This is an easier repair that can be done by just about anyone. The only screw driver required is a Philips #0 and a Philips #00 screw drivers. You will also need a pair of tweezers and a set of opening picks.

你所需要的

  1. HP Envy x2 13-j002dx Battery Replacement, Battery: 步骤 1 中的图像 1，1

    • Remove five 4mm Phillips #0 screws securing the lower case to the HP Envy x2 13-j002dx.

    编辑

  2. HP Envy x2 13-j002dx Battery Replacement: 步骤 2 中的图像 1，1

    • Use a Phillips #00 screwdriver to remove the two 3.5 mm screws from the bottom of the device—one on each side of the keyboard dock.

    编辑

  3. HP Envy x2 13-j002dx Battery Replacement: 步骤 3 中的图像 1，1

    • Use a pair of tweezers to remove the screw covers on the bottom of the device.

    • Use a Phillips #0 screwdriver to remove the two 4mm screws.

    编辑

  5. HP Envy x2 13-j002dx Battery Replacement: 步骤 4 中的图像 1，2 HP Envy x2 13-j002dx Battery Replacement: 步骤 4 中的图像 2，2

    • Use an opening pick to remove the plastic cover above the back stand.

    • Pry the cover off.

    • Use a Phillips #0 screwdriver to remove the four 4 mm screws.

    编辑

  6. HP Envy x2 13-j002dx Battery Replacement: 步骤 5 中的图像 1，1

    • Use an opening pick and a prying tool, and go around the device to remove the back cover from the rest of the assembly.

    编辑

  7. HP Envy x2 13-j002dx Battery Replacement: 步骤 6 中的图像 1，1

    • Unplug the battery from the motherboard.

    编辑

  8. HP Envy x2 13-j002dx Battery Replacement: 步骤 7 中的图像 1，2 HP Envy x2 13-j002dx Battery Replacement: 步骤 7 中的图像 2，2

    • Carefully pull up on the battery connector from the speaker.

    • Use a pair of tweezers and remove the taped down wire for the speaker.

    • Use a Phillips #00 screwdriver to remove the seven 3mm screws around the battery.

    编辑

  9. HP Envy x2 13-j002dx Battery Replacement: 步骤 8 中的图像 1，1

    • Carefully lift up and remove the battery.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

一条评论

For step 2, when I was taking the screws out, they were held in by the magnets that were on either side of them making it difficult to remove. I ended up having to use another magnet to get them out.

Reed Jochimsen - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 18

总计 1,888