修复你的物品 社区 商店

HP Envy m6-k015dx Touchpad Replacement

你所需要的

  1. 注意：步骤 1-6 源自标记为进行中的 指南。

    • Shut down the computer

    • Remove all external devices

    • Unplug the AC adapter

    翻译

    • Close the computer

    • Turn it upside down

    • Remove the 12 screws from the bottom.

    翻译

    • Gently remove the service cover

    翻译

    • Disconnect the battery cable from the motherboard.

    翻译

    • Remove the 4 screws that hold the battery.

    翻译

    • Gently lift the battery out of the computer.

    翻译

  8. 注意：步骤 7-9 源自标记为进行中的 指南。

    • Remove the fan cable

    翻译

    • Remove the 2 screws around the fan

    翻译

    • Lift the fan up

    翻译

    • Unscrew the 3 screws that hold the card reader board to the system

    • Raise the card reader board from the system

    翻译

    • Remove the four screws that pin down the hard drive

    • Disconnect the harddrive from its connector

    • Remove the harddrive

    翻译

    • Only complete this step if your computer model has a solid state drive

    • Remove the two screws at the top of the solid state drive

    • Remove the solid state drive

    翻译

    • Remove the thirteen screws around the keyboard bracket

    • Gently remove the keyboard bracket from its top

    翻译

    • Remove the 4 screws on the touchpad's board

    • Gently lift the touchpad board from the side that the screws were on

    • Remove the touchpad board

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 6

总计 67