加入维修社区 - 创建账户

HP Envy 23-d060qd TouchSmart Motherboard Replacement

Zachary Dicks 和 6 其他贡献者

最后更新于 2016年1月25日

6496

浏览统计数据:

过去24小时: 3
过去 7 天：: 27
过去 30 天：: 124
总计: 6,496

暂时还没有人对本指南发表评论。你想做第一个评论的人吗？

Go to guide comments

7 人已将本指南标记为“已完成”。你会是下一个完成的人吗？

1 人收藏（并订阅）了本指南。你会是下一个吗？

45分钟

中等

简介

转到步骤 1 ↓

My computer is being a bird-brain. How do I make it intelligent again? I know replacing a motherboard is a very lengthy and delicate procedure.

你所需要的

工具

1. 步骤 1 Back Panel
  Use your hands to unclip the plastic snaps on the back panel of the device.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Remove the three 11.5mm PH2 screws from the back panel.
  
  The screws will not fall out of the back panel, but they will unscrew to release the back panel.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 3
  Now, take the back panel off by pulling at it gently with your hands.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 4 Motherboard
  Remove the five 7.5mm T15 screws from the cover plate.
  
  Remove the cover plate.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 5
  Remove the 7.5mm T15 screw on the left side of the first heatsink.
  
  Remove the four 15mm T15 screws on the right side of the first heatsink.
  
  Use your hands to pull the first heatsink free from the computer.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 6
  Remove the 7.5mm T15 screw on the left side of the second heatsink.
  
  Remove the four 8mm PH1 screws on the right side of the second heatsink.
  
  Pull the second heatsink free from the computer.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 7
  Slowly work your way across the bottom of the motherboard, disconnecting all of the labeled connections. Use your hands to gently pull the plastic piece at the ends of the wires.
  
  Be very gentle with all of the critical connections, some of them may be very fragile. Pulling on the wires can damage them.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
6. 步骤 8
  Slowly work your way along the left side of the motherboard, disconnecting all labeled connections. Use your hands to gently pull the plastic piece at the ends of the wires.
  
  Be very gentle with all of the critical connections, some of them may be very fragile. Pulling on the wires can damage them.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
8. 步骤 9
  Slowly work your way along the top of the motherboard, disconnecting the labeled connection. Use your hands to gently pull the plastic piece at the end of the wire.
  
  Be very gentle with all of the critical connections, some of them may be very fragile. Pulling on the wire can damage it.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
9. 步骤 10
  Gently remove the two labeled connections.
  
  Be very gentle with these connections. They are only a single wire.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
10. 步骤 11
  Remove the ten 7mm T15 screws from the motherboard.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
11. 步骤 12
  Use your hands to gently remove the motherboard from the computer.
  
  Be careful of wires in the way. If you realize something is still connected, put the motherboard back, remove the connection, and try again.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024