HP Envy 17-3070NR RAM Replacement

简介

Use this guide to upgrade the RAM of your HP Envy 17-3070NR to boost performance or to replace faulty one if you start getting RAM related blink codes, which are explained in the troubleshooting section.

你所需要的

步骤 1 Back Cover

HP Envy 17-3070NR RAM Replacement, Back Cover: 步骤 1 中的图像 1，2

HP Envy 17-3070NR RAM Replacement, Back Cover: 步骤 1 中的图像 2，2

Before you begin taking apart the computer, make sure that it is completely powered off.
Slide the release latch away from the nearest edge.
Slide the back cover off of the computer.

翻译

步骤 2

HP Envy 17-3070NR RAM Replacement: 步骤 2 中的图像 3，3

Remove the six 3.7mm Phillips screws.
Slide the back cover until it clicks, then lift it straight off.

翻译

步骤 3 RAM

HP Envy 17-3070NR RAM Replacement, RAM: 步骤 3 中的图像 1，3

HP Envy 17-3070NR RAM Replacement, RAM: 步骤 3 中的图像 2，3

HP Envy 17-3070NR RAM Replacement, RAM: 步骤 3 中的图像 3，3

Press down on both tabs on either side of the top RAM stick.
The RAM will slightly pop out and you will be able to slide it out of it's cavity.
Repeat the same process for the second stick of RAM if needed.