跳转到主内容

HP Envy 15-u001dx Wireless Network Card Replacement

你所需要的

  1. HP Envy 15-u001dx Wireless Network Card Replacement, HP Envy 15-u001dx Disassembly: 步骤 1 中的图像 1,1
    • Remove the two no-slip covers on the rear, bottom side using spudger shown in top center of picture.

    • The two in the front do not have to be removed as there are no screws underneath them.

  2. HP Envy 15-u001dx Wireless Network Card Replacement: 步骤 2 中的图像 1,1
    • Remove the two cover tabs towards center of the bottom as there are screws underneath them.

  3. HP Envy 15-u001dx Wireless Network Card Replacement: 步骤 3 中的图像 1,1
    • Remove all fourteen 4.5 mm screws from the bottom using a Phillips #0 screwdriver. Each location is marked by a red circle in the picture.

  4. HP Envy 15-u001dx Wireless Network Card Replacement: 步骤 4 中的图像 1,1
    • Separate the top cover by using a spudger to go around the sides freeing the inside latches.

    • Once the bottom is free, carefully open to the inside as there are two ribbons that connect your keyboard and touch pad to the top cover.

  5. HP Envy 15-u001dx Wireless Network Card Replacement: 步骤 5 中的图像 1,2 HP Envy 15-u001dx Wireless Network Card Replacement: 步骤 5 中的图像 2,2
    • Use the spudger to detach the two ribbons from their connectors.

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  6. HP Envy 15-u001dx Wireless Network Card Replacement, Wireless Network Card: 步骤 6 中的图像 1,1
    • Remove the Phillips #0 4.5 mm screw from the wireless network card located in the back, right side of the interior.

  7. HP Envy 15-u001dx Wireless Network Card Replacement: 步骤 7 中的图像 1,1
    • Use the spudger to remove the antenna connector attached to the black wire labeled "1".

    • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

  8. HP Envy 15-u001dx Wireless Network Card Replacement: 步骤 8 中的图像 1,1
    • Detach the antenna connector for the white wire labeled "2".

  9. HP Envy 15-u001dx Wireless Network Card Replacement: 步骤 9 中的图像 1,1
    • Gently remove the card from its slot by pulling.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Dakota Presley

于10/05/16注册

885 声望

创作了6篇指南

团队

USF Tampa, Team 9-4, Lacy Fall 2016 USF Tampa, Team 9-4, Lacy Fall 2016 的会员

USFT-LACY-F16S9G4

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 8

总计 582