跳转到主内容

HP Elitebook 820 G1 Monitor Display Replacement

你所需要的

  1. HP Elitebook 820 G1 Monitor Display Replacement, Battery: 步骤 1 中的图像 1,1
    • Ensure the laptop is completely powered off and power adapter is unplugged before removing the battery.

    • Turn over laptop so that the bottom is showing.

    • Unlock the latch.

  2. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 2 中的图像 1,1
    • Remove the back cover and you will then be able to see the battery.

  3. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 3 中的图像 1,1
    • Unlatch the two latches securing the battery in the case.

  4. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 4 中的图像 1,1
    • Use a plastic opening tool to lift and remove the battery.

  5. HP Elitebook 820 G1 Monitor Display Replacement, Fan: 步骤 5 中的图像 1,1
    • Remove the hard drive by unscrewing the four 8mm screws with the T7 philip's head.

  6. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 6 中的图像 1,1
    • Pry off ten rubber paddings on the outer edge of the laptop to reveal the torx screws.

    • Unscrew the ten 8mm torx screws that are under the rubber paddings using the T7 tip torx screwdriver.

  7. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 7 中的图像 1,1
    • Remove the two 4mm screws indicated by the M2.5X4 using the J00 tip screwdriver.

    • Remove SD card cap by just sliding out to reveal one screw.

  8. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 8 中的图像 1,1
    • Remove the two 3mm screws indicated by the M2.03 using the J00 tip screwdriver.

    • Remove the 4mm SD card screw using the J00 tip.

  9. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 9 中的图像 1,1
    • Remove the one 4mm fan screw using the J00 tip screwdriver.

    • Remove screw and metal plate to expose ribbon cable connector.

  10. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 10 中的图像 1,1
    • Use an opening tool to pry up the ribbon connector to disconnect.

  11. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 11 中的图像 1,1
    • Turn laptop over back to normal position as shown in the image.

    • Use opening tools to pry up keyboard.

    • When prying up keyboard, be sure to start near any corner of the keyboard.

    • There are two ribbon cables that must be disconnected before fully removing keyboard.

  12. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 12 中的图像 1,3 HP Elitebook 820 G1 Monitor Display Replacement: 步骤 12 中的图像 2,3 HP Elitebook 820 G1 Monitor Display Replacement: 步骤 12 中的图像 3,3
    • Carefully lift keyboard on one side to expose the two ribbon cables.

    • Use an opening tool to lift up the locking clip and unplug the two ribbon cables.

  13. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 13 中的图像 1,1
    • Remove the two 4mm screws centered notated by the keyboard logo using the J00 tip.

  14. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 14 中的图像 1,3 HP Elitebook 820 G1 Monitor Display Replacement: 步骤 14 中的图像 2,3 HP Elitebook 820 G1 Monitor Display Replacement: 步骤 14 中的图像 3,3
    • Once keyboard has been fully removed, the system case containing the motherboard can be lifted out easily.

    • The display is connected to the shell of the laptop.

  15. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 15 中的图像 1,1
    • Unplug fan cable by pulling away from its connector.

  16. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 16 中的图像 1,1
    • Unscrew the two 6mm fan screws using the J00 tip.

    • Fan screws are encased in springs and cannot be removed.

  17. HP Elitebook 820 G1 Monitor Display Replacement, Monitor display: 步骤 17 中的图像 1,1
    • Retrieve the monitor display connected to the plastic chassis.

  18. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 18 中的图像 1,1
    • Unscrew the two 4mm hinge screws using the Philips 00 tip screwdriver.

  19. HP Elitebook 820 G1 Monitor Display Replacement: 步骤 19 中的图像 1,1
    • Unhinge the monitor display from the chassis.

结论

To reassemble your device, follow these instructions in reverse order.

团队

USF Tampa, Team S5-G1, Eyestone Spring 2018 USF Tampa, Team S5-G1, Eyestone Spring 2018 的会员

USFT-EYESTONE-S18S5G1

3 名成员

创作了7篇指南

一条评论

Hello,

I need to replace the inverter as my screen is too much dark.

I cannot see the inverter and even I cannot find any inverter for this model.

Do you know how to access to this inverter? Is it embedded within the screen?

Thanks by advance.

BR

richard P - 回复

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 4

过去 30 天: 19

总计 3,242