HP EliteBook 8530w Fan Replacement

简介

If your device is frequently overheating or making excessive noise, especially during compute intensive tasks, it may be due to a malfunctioning or dirty fan. This guide will show you how to replace the fan in the HP EliteBook 8530w laptop in the hopes of alleviating these issues.

你所需要的

步骤 1 Battery

HP EliteBook 8530w Fan Replacement, Battery: 步骤 1 中的图像 1，2

HP EliteBook 8530w Fan Replacement, Battery: 步骤 1 中的图像 2，2

Turn the laptop off then place it down so that the back is facing up.
Slide the battery release switch to the left and hold it there.

编辑

步骤 2

Pull the battery away upward and away from the laptop while continuing to hold the release switch.
Once the battery is removed from the laptop, you may release the switch.
To properly dispose of your battery, look for the closest location that accepts electronic waste in your area and drop it off there.

编辑

步骤 3 Fan

HP EliteBook 8530w Fan Replacement, Fan: 步骤 3 中的图像 1，1

Unscrew the two screws from the center panel with a Phillips #00 screwdriver.
These screws should have a keyboard icon stamped next to them.

编辑

步骤 4

HP EliteBook 8530w Fan Replacement: 步骤 4 中的图像 3，3

Flip the laptop over then open the lid.
Slide the four tabs at the top of the keyboard towards you with your finger.
Wedge a finger or spudger in the top corner of the keyboard and hinge it forward to reveal the backside.
Do not try to pull the keyboard out of the laptop. There are still cables connected to it that can easily be damaged.

编辑

步骤 5

HP EliteBook 8530w Fan Replacement: 步骤 5 中的图像 3，3

Use a Torx TR7 screwdriver to remove the three screws holding down the fan.
Gently remove the fan connector that plugs into the motherboard.
Note: It can help to use something like tweezers to remove the connector if you are having trouble.
Remove the fan.