跳转到主内容

简介

Are keys on your HP EliteBook 8440p laptop keyboard broken, stuck, or dirty? It might be time to replace your keyboard, and this guide will teach you how to do it yourself! Removing the keyboard is also a crucial step to getting inside the computer to make repairs or clean.

  1. Before you begin, unplug all cables and devices from the laptop. Lay the laptop on its cover. Lay the laptop on its cover.
    • Before you begin, unplug all cables and devices from the laptop.

    • Lay the laptop on its cover.

  2. Release the battery by pulling the battery tab to the left. Remove the battery.
    • Release the battery by pulling the battery tab to the left.

    • Remove the battery.

    • The battery is already removed in the reference image.

  3. With a Phillips-head screwdriver, unscrew the three screws marked with the keyboard icon. Do not remove the screws from the casing; they are built to stay in when loose. Do not remove the screws from the casing; they are built to stay in when loose.
    • With a Phillips-head screwdriver, unscrew the three screws marked with the keyboard icon.

    • Do not remove the screws from the casing; they are built to stay in when loose.

  4. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  5. Turn the laptop over and open the cover. Lift the keyboard gently with a forward and upward motion. Rest the keyboard over the touch pad.
    • Turn the laptop over and open the cover.

    • Lift the keyboard gently with a forward and upward motion.

    • Rest the keyboard over the touch pad.

    • When reassembling, line up the tabs at the keyboard's base with the casing's slots and reverse the motion.

  6. Using a spudger or flat-head screwdriver, pull up the tabs at the black ribbon cable's sides to unlock the cable.
    • Using a spudger or flat-head screwdriver, pull up the tabs at the black ribbon cable's sides to unlock the cable.

  7. Pull the black ribbon cable out of its slot. Pull the black ribbon cable out of its slot.
    • Pull the black ribbon cable out of its slot.

  8. Using a spudger or flat-head screwdriver, pull up the tabs at the white ribbon cable's sides to unlock the cable.
    • Using a spudger or flat-head screwdriver, pull up the tabs at the white ribbon cable's sides to unlock the cable.

  9. Pull the white ribbon cable out of its slot. Pull the white ribbon cable out of its slot.
    • Pull the white ribbon cable out of its slot.

  10. Remove the keyboard from the laptop.
    • Remove the keyboard from the laptop.

结论

To reassemble your device, follow these instructions in reverse order.

16等其他人完成本指南。

Michael Uytingco

于2015年09月29日注册

621 信誉积分

撰写一个指南

团队

Cal Poly, Team 10-2, Green Fall 2015 Cal Poly, Team 10-2, Green Fall 2015 的会员

CPSU-GREEN-F15S10G2

3 名成员

创作了3篇指南

The top of the keyboard has locking tabs that need to be pulled back towards the keyboard center or it won't come out. They hold the replacement keyboard in place long enough to get the screws into it.

Robert Taylor - 回复

But you don’t need to remove the battery.

Jakub Daszkiewicz - 回复

Taking it out was easy, putting a new one in- just impossible, brackets very brittle and cracking. Had to give it to the shop to fix it.

zbig j - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 21

过去的30天: 179

总计 10,462