修复你的物品 社区 商店

HP Elite x2 G1 1012 Rear Facing Camera Replacement

简介

Use this guide to replace and / or maintain the rear facing camera.

你所需要的

  1. HP Elite x2 G1 1012 Rear Facing Camera Replacement, Display: 步骤 1 中的图像 1，1

    • Be sure to power off and unplug your device before you begin your repair.

    • With the screen face down, lift up the stand as far as it goes.

    • Make sure not to force it past the resting point.

    编辑

  2. HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 2 中的图像 1，2 HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 2 中的图像 2，2

    • Use a T5 driver to remove the six screws on the back of the tablet.

    编辑

  3. HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 3 中的图像 1，1

    • After removing the screws, delicately close the stand.

    • Flip the tablet on its back so that the screen is facing up.

    编辑

  4. HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 4 中的图像 1，2 HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 4 中的图像 2，2

    • Use the suction cup to carefully separate the screen from the device. Pull upwards with a fluid and smooth motion.

    • Do not lift too fast! There will still be wires connecting the screen to the device. Make sure they are not tampered with.

    编辑

  6. HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 5 中的图像 1，3 HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 5 中的图像 2，3 HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 5 中的图像 3，3

    • Remove the tape on the lower left side of the screen.

    • Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen.

    编辑

  7. HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 6 中的图像 1，2 HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 6 中的图像 2，2

    • Disconnect the flex cable from the device using the spudger.

    • Remove the Display Assembly from the device.

    编辑

  8. HP Elite x2 G1 1012 Rear Facing Camera Replacement, Rear Facing Camera: 步骤 7 中的图像 1，1
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Use a pair of tweezers to remove the flex cable on the top of the camera.

    编辑

  9. HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 8 中的图像 1，1

    • Use a Phillips #00 screwdriver to remove the screw in the corner of the camera.

    编辑

  10. HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 9 中的图像 1，1

    • Use a spudger to delicately lift up the camera.

    编辑

  11. HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 10 中的图像 1，2 HP Elite x2 G1 1012 Rear Facing Camera Replacement: 步骤 10 中的图像 2，2

    • Use a pair of tweezers to disconnect the flex cable from the motherboard and remove the rear facing camera from the device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Colin Mika

于04/19/18注册

943 声望

创作了6篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team S24-G7, Maness Spring 2018 Cal Poly, Team S24-G7, Maness Spring 2018 的会员

CPSU-MANESS-S18S24G7

4 名成员

创作了6篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 8

总计 683