HP Elite x2 G1 1012 Front Facing Camera Replacement

步骤 1 Display

HP Elite x2 G1 1012 Front Facing Camera Replacement, Display: 步骤 1 中的图像 1，1

Be sure to power off and unplug your device before you begin your repair.
With the screen face down, lift up the stand as far as it goes.
Make sure not to force it past the resting point.

编辑

步骤 2

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 2 中的图像 1，2

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 2 中的图像 2，2

Use a T5 driver to remove the six screws on the back of the tablet.

编辑

步骤 3

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 3 中的图像 1，1

After removing the screws, delicately close the stand.
Flip the tablet on its back so that the screen is facing up.

编辑

步骤 4

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 4 中的图像 1，2

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 4 中的图像 2，2

Use the suction cup to carefully separate the screen from the device. Pull upwards with a fluid and smooth motion.
Do not lift too fast! There will still be wires connecting the screen to the device. Make sure they are not tampered with.

编辑

步骤 5

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 5 中的图像 1，3

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 5 中的图像 2，3

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 5 中的图像 3，3

Remove the tape on the lower left side of the screen.
Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen.

编辑

步骤 6

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 6 中的图像 1，2

HP Elite x2 G1 1012 Front Facing Camera Replacement: 步骤 6 中的图像 2，2

Disconnect the flex cable from the device using the spudger.
Remove the Display Assembly from the device.