简介

This guide provides detailed instructions for replacing the display on the HP Elite x2 1012 G1. A damaged or malfunctioning display can affect visibility, touch responsiveness, and overall device performance. Replacing the screen will help restore full functionality and visual clarity. Before beginning, power off the device completely and disconnected from all cables and accessories. Follow each of these steps carefully to ensure a safe and successful replacement.

你所需要的

步骤 1 Display

HP Elite x2 G1 1012 Display Replacement, Display: 步骤 1 中的图像 1，1

Be sure to power off and unplug your device before you begin your repair.
With the screen face down, lift up the stand as far as it goes.
Make sure not to force it past the resting point.

编辑

步骤 2

Use a T5 driver to remove the six screws on the back of the tablet.

编辑

步骤 3

After removing the screws, delicately close the stand.
Flip the tablet on its back so that the screen is facing up.

编辑

步骤 4

Use the suction cup to carefully separate the screen from the device. Pull upwards with a fluid and smooth motion.
Do not lift too fast! There will still be wires connecting the screen to the device. Make sure they are not tampered with.

编辑

步骤 5

HP Elite x2 G1 1012 Display Replacement: 步骤 5 中的图像 3，3

Remove the tape on the lower left side of the screen.
Underneath the tape, disconnect the LCM cable, the larger wire that was underneath the tape, from the back of the tablet screen.

编辑